cable for 12 V DC ignition current of the vehicle. In this manner the car radio and an electric aerial can only use current from the vehicle when the ignition is switched on.
•Connect the cable for the vehicle’s minus/ ground connection
LConnection with CD Changer
Tip! Use a connecting cable with DIN
A standard CD changer with DIN
•Install the connecting cable with the DIN
•Guide the connecting cable with the DIN
•Insert the DIN
•Insert the DIN
Installation
cable as far as it will go into the OUT / REAR cinch R plug jack (amplifier connection [red / rear right]) fu.
•Then insert the two red plugs of the first cinch connection cable as far as it will go into the REAR cinch R plug jack (amplifier connection [red / rear right]) of the amplifier.
•Insert the white plug of the first cinch connection cable as far as it will go into the OUT / REAR cinch L plug jack (amplifier connection [white / rear left]) gl.
•Then insert the second white plug of the first cinch connection cable as far as it will go into the REAR cinch L plug jack (amplifier connection [white / rear left]) of the amplifier.
•Insert the red plug of the second cinch connection cable as far as it will go into the OUT / FRONT cinch plug jack (amplifier connection [red / front right]) gm.
•Then insert the second red plug of the second cinch connection cable as far as it will go into the FRONT cinch plug jack (amplifier connection [red / front right]) of the amplifier.
•Insert the white plug of the second cinch connection cable as far as it will go into the OUT / FRONT cinch plug jack (amplifier connection [white / front left]) gn.
•Then insert the second white plug of the second cinch connection cable as far as it will go into the FRONT cinch plug jack (amplifier connection [white / front left]) of the amplifier.
L Connection of an amplifier | L Connecting a portable audio device |
Tip!
Use two cinch connection cables (insulation and plug: white / red).
One amplifier per speaker output channel can be connected to the device.
•Install the two cinch connection cables in the vehicle according to their operating instructions.
•Pass two cinch connection cables to the amplifier and carefully out of the front of the DIN assembly bracket.
•Insert the red plug of the first cinch connection
For establishing a cinch connection to any audio source the headphone output (3.5 mm stereo jack) of any audio device (e.g. MP3 player) can be connected to the car radio.
Use a 3.5 mm jack plug connection cable to 2x cinch plugs.
•Guide the cinch connection cable to the portable audio device and carefully out of the front of the DIN assembly bracket.
•Insert the red plug of the cinch connection cable as far as it will go into the LINE IN R
GB/IE 13