•Press the PWR / DIM button cnand adjust the brightness (dimming).
-The tuner is activated and [FM 1] (1st FM band), 87.50 (station frequency) appears in the display window 3. [EON] and [AF] flash.
-The loudspeakers play back the reception from the tuner.
•Turn the “SEL / VOL” control knob cpto adjust the volume as desired.
LTurning off
•Press and hold the PWR / DIM button cnfor two seconds. The background light of the control panel 1goes out and the display window 3 reads [GOODBYE]. When turning off, the device stores all settings from the last operation. When turning the device on again, the last used audio storage medium or the tuner starts to play.
LSelecting and adjusting the sound
VOL: Volume of the loudspeakers
•Adjust the loudspeakers to the desired volume by turning the “SEL / VOL” control knob cp.
BAS: Bass (lower range of the loudspeaker sound)
•Press THE “SEL / VOL” control knob cpuntil [BAS] appears in the display window 3.
•Turn the “SEL / VOL” control knob cpto set the desired bass level.
Values between
TRE: Treble (higher range of the loudspeaker sound)
•Press the “SEL / VOL” control knob cp repeatedly until [TRE] appears in the display window 3.
•Turn the “SEL / VOL” control knob cpto set the desired treble level.
Values between
BAL: Balance (difference in volume between the left and right loudspeakers)
•Press the “SEL / VOL” control knob cpuntil
Operation
[BAL] appears in the display window 3.
•Turn the “SEL / VOL” control knob cpto set the desired balance.
Values between [8L] and [8R] can be selected. The mean value is [0].
FAD: Fading (difference in volume between the front and rear loudspeakers)
•Press the “SEL / VOL” control knob cpuntil [FAD] appears in the display window 3.
•Turn the “SEL / VOL” control knob cpto set the desired fading level. Values between [8F] and [8R] can be selected. The mean value is [0].
Your settings are automatically stored.
LSelecting and adjusting playback functions
•Press the “SEL / VOL” control knob cpand keep it held down for two seconds.
In order to select the next function press the “SEL / VOL” control knob cpuntil you have reached the required function.
INVOL: Volume when switching on.
•Turn the “SEL / VOL” control knob cpto set the desired volume of the car radio when switching on.
ADJ: Time display.
•Set the desired hour setting by turning the “SEL / VOL” control knob cpclockwise.
•Set the desired minute setting by turning the “SEL / VOL” control knob cpcounter clockwise.
TAVOL: Volume at which the traffic information is played back from the tuner.
•Turn the “SEL / VOL” control knob cpto set the desired volume of the traffic information played through the tuner. Please ensure that this important information for road users is loud enough for you to hear.
Note: If the volume is too high there is a danger that you will be startled or unable to hear other road users.
GB/IE 15