Silvercrest KH 2380 operation manual Adjusting volume, Setting the 3-Band PLL Tuner, Mute Function

Page 16

Operation

EON: (ON / OFF): EON function on or off.

Turn the “SEL / VOL” control knob cpuntil the display 3reads [EON ON]; the EON function is now activated.

Turn the “SEL / VOL” control knob cpuntil the display 3reads [EON OFF]; the EON function is now deactivated.

DSP: (NONE / CLAS / ROCK / POP / FLAT): Selection of an acoustic pattern for various playback styles of music and language with preset bass and treble levels.

Turn the “SEL / VOL” control knob cpuntil [NONE] appears in the display window 3. The acoustic pattern of your setting for [BAS] and [TRE] is selected.

Turn the “SEL / VOL” control knob cpuntil [CLAS] appears in the display window 3; the acoustic pattern for classical music is selected.

Turn the “SEL / VOL” control knob cpuntil [ROCK] appears in the display window 3; the acoustic pattern for rock music is selected.

Turn the “SEL / VOL” control knob cpuntil [POP] appears in the display window 3; the acoustic pattern for pop music is selected.

Turn the “SEL / VOL” control knob cpuntil [FLAT] appears in the display window 3; the acoustic pattern for speech is selected.

Your settings are automatically stored.

The device automatically changes back to playback mode after five seconds.

LAdjusting volume

Increase the volume by turning the “SEL / VOL” control knob cpclockwise.

Reduce the volume by turning the “SEL / VOL” control knob cpcounter clockwise.

Mute Function

The mute function enables you to turn off the loudspeakers.

Press the

MU

button cl. Playback is muted

 

 

and [MUTE] appears in the display window 3.

Press the

 

button clagain. Playback

MU

16

 

GB/IE

 

 

 

 

 

 

 

 

 

 

continues as before the MUTE function was activated and [MUTE] disappears from the display window 3.

Loudness Function

The loudness function increases the playback level of the bass sounds when the volume is low.

Press the LD / MD button buand keep it held down for approximately 2 seconds. The loudness function is activated, [LOUD ON] appears in the display window 7followed by [LOUD].

Turn the “SEL / VOL” control knob coagain. [LOUD OFF] appears in the display window.

Press the LD / MD button buagain and keep it held down for approximately 2 seconds. The loudness function is deactivated, [LOUD OFF] appears in the display window 3followed by [LOUD].

LSetting the 3-Band PLL Tuner

Press the LD / MD button buuntil TUNER appears in the display window 3.

You can select 3 x FM frequency bands (FM1, FM2 and FM3), 2 x medium wave frequency bands (MW1 and MW2) and 1 x long wave frequency band. Each frequency band has six presets on which you can store radio stations.

Press the BD / ENT button bsand select the frequency band you wish to receive. In the display window 3you will now see the designation of the frequency band (e.g. [FM2]), the frequency (e.g. [99.20]) of a radio station that is being received or the programme ID during stereo reception and [TP] for traffic information.

Automatic Station Search

Start the station search at lower frequencies

by briefly pressing the 9 button 6. The tuner automatically plays back the next radio station that it receives and shows the information in the display window 3.

Start the station search at higher frequencies

by briefly pressing the : button 5. The tuner automatically plays back the next radio station that it receives.

Image 16
Contents Page GB / IE Operation and Safety Notes Cocp Bu btbsbrbqbpbobnbmbl987 Cs ct cu dl dm Dp dr Gngm Glftfsfu fr Safety InstallationIntroduction OperationCar Radio KH For your personal safetyProper Use Introduction  Scope of SupplyTechnical Information IntroductionAudio Storage Media Safety Sustained temperature in excess of 50 CTip! What to do With a CD changer With a terminal amplifierTip! What to do Safety / Preparation / Installation PreparationTo connect a CD changer you require For the connection of a portable audio device you requireInstallation Connection with car’s 12 V DC power supplyConnection to the car’s loudspeaker Tip! Use an ISO plugTip Connection with CD ChangerUse a 3.5 mm jack plug connection cable to 2x cinch plugs Installation / Operation Attaching to the DIN assembly bracketSwitching on Connecting to the aerial of the motor vehicleVOL Volume of the loudspeakers Your settings are automatically storedSelecting and adjusting playback functions OperationAdjusting volume Setting the 3-Band PLL TunerMute Function Loudness FunctionManual Radio Station Search Car radio stores the radio station on storage locationPlaying Back the Stored Stations Including Traffic Information in PlaybackPlaying from audio storage media PTY FunctionBreaking news Disp FunctionAccessing Track Passages Inserting a CDSelecting Tracks Select a track by file nameSelecting Folders PauseRepeat IntervalRecording from the Tuner Starting RecordingStopping Recording Recording from Audio CDOperation / Promote Control Promote ControlTroubleshooting Maintenance and ServiceMaintenance and Service / Disposal / Information Important warranty notesDisposal InformationKompernass Service Ireland 087-99 62 GarantiekarteMP3 Car Radio Please write return address in capital lettersPage Page Page