Silvercrest KH 2380 Safety, Tip! What to do, With a CD changer With a terminal amplifier

Page 9

LSafety

Important specific notes on safety

The following notes are for your safety and satisfaction in operating the device. Please observe that non- compliance with these safety notes may lead to substantial risks caused by accident.

Explanation of the icons and terminology used.

cDanger! Avoid risk to life!

mCaution! Avoid risk of injury and damage to property!

Tip! What to do!

cDanger!

·Do not allow small children unsupervised near the packaging material! Risk of suffocation!

·Do not allow infants and children unsupervised into the vicinity of the device!

·Protect yourself against an electric shock! Avoid any short circuits during connections:

-with the vehicle’s 12 V DC power supply

-with the max. 2 pairs of loudspeakers with the impedance 4 - 8 Ohm

-with a CD changer

-with a terminal amplifier

·Before connecting to the 12 V DC power supply of a car, obtain information on how to maintain electrical safety based on the vehicle‘s operation manual!

·Ensure that when connecting to a vehicle‘s 12 V DC power supply, there is no voltage in the vehicle‘s connecting cables. Equip the connecting cords with fuse holders (3 x 15 A)!

·When installing into a car, ensure that the vehicle is out of operation and in a secure standstill position! Turn off the ignition and bring the vehicle into parking position with applied hand-brake.

·Complete the connection to the 12 V DC power supply while fully protected against humidity!

·Complete the installation in a car, the assembly, the maintenance and the service disconnected from the 12 V DC power supply!

·Do not expose the device to moisture, fire, heat

Safety

and sustained temperature in excess of 50° C!

·Do not damage any lines carrying fuel or for electricity, brakes, hydraulics, water or data transfer when tightening the screws!

·Ensure that the 12 V DC constant current plug- in fm, the 12 V DC ignition current plug-in foand possibly the powered aerial plug-in fn do not come into contact with a fuel line (e.g. petrol-carrying line)!

·Do not allow yourself to be distracted while driving by operating the car radio or from its displays! Familiarise yourself with its operation before driving and practise the safe use of the car radio’s features! Set the volume only to such level that the sirens of emergency vehicles can be heard on time.

mCaution!

·Avoid injuries and damage to the sensitive sense of hearing of passengers (in particular infants, children and pets) while in the car! Adjust the volume and balance of the loudspeakers for all passengers to a healthy and comfortable level!

·Adjust the volume such that you can always hear the warning signals of other road users.

·Before operation, check if all components have been assembled in accordance with the operating instructions!

·Before assembly and operation, check the delivery for damage and completeness!

·Use the car radio only with the supplied original parts!

·Do not cover the metal casing dtwith objects!

·Protect all electronic contact areas against short circuiting, humidity, damage and impurities!

·Do not place the device on or near a car battery!

·Prevent a short circuit and damage! Ensure that no alien matter or objects can access the inside!

·Disconnect the car radio in the event of operational malfunctioning and damage instantly from the 12 V DC power supply!

·Connection to the loudspeakers, CD changer, amplifier and audio storage devices (CD, CD-R, CD-RW, USB memory stick, MP3 player, SD, and MMC) must be carried out as described in the relevant operating manual.

·Have the car radio repaired exclusively by

GB/IE

Image 9
Contents Page GB / IE Operation and Safety Notes Cocp Bu btbsbrbqbpbobnbmbl987 Cs ct cu dl dm Dp dr Gngm Glftfsfu fr Installation SafetyIntroduction OperationFor your personal safety Car Radio KHProper Use Scope of Supply Introduction Introduction Technical InformationAudio Storage Media Sustained temperature in excess of 50 C SafetyTip! What to do With a CD changer With a terminal amplifierTip! What to do Preparation Safety / Preparation / InstallationTo connect a CD changer you require For the connection of a portable audio device you requireConnection with car’s 12 V DC power supply InstallationConnection to the car’s loudspeaker Tip! Use an ISO plugConnection with CD Changer TipUse a 3.5 mm jack plug connection cable to 2x cinch plugs Attaching to the DIN assembly bracket Installation / OperationSwitching on Connecting to the aerial of the motor vehicleYour settings are automatically stored VOL Volume of the loudspeakersSelecting and adjusting playback functions OperationSetting the 3-Band PLL Tuner Adjusting volumeMute Function Loudness FunctionCar radio stores the radio station on storage location Manual Radio Station SearchPlaying Back the Stored Stations Including Traffic Information in PlaybackPTY Function Playing from audio storage mediaBreaking news Disp FunctionInserting a CD Accessing Track PassagesSelecting Tracks Select a track by file namePause Selecting FoldersRepeat IntervalStarting Recording Recording from the TunerStopping Recording Recording from Audio CDPromote Control Operation / Promote ControlMaintenance and Service TroubleshootingImportant warranty notes Maintenance and Service / Disposal / InformationDisposal InformationGarantiekarte Kompernass Service Ireland 087-99 62MP3 Car Radio Please write return address in capital lettersPage Page Page