Alpine CDA-9813, CDA-9811, CDA-9815 37-EN, To prevent noise/interference in the audio system

Page 39

1Antenna Receptacle

2Power Antenna Lead (Blue)

Connect this lead to the +B terminal of your power antenna, if applicable.

This lead should be used only for controlling the vehicle's power antenna. Do not use this lead to turn on an amplifier, or a signal processor, etc.

3Remote Turn-On Lead (Blue/White)

Connect this lead to the remote turn-on lead of your amplifier or signal processor.

4Audio Interrupt In Lead (Pink/Black)

5Switched Power Lead (Ignition) (Red)

Connect this lead to an open terminal on the vehicle's fuse box or another unused power source which provides (+)12V only when the ignition is turned on or in the accessory position.

6Battery Lead (Yellow)

Connect this lead to the positive (+) post of the vehicle's battery.

7Ground Lead (Black)

Connect this lead to a good chassis ground on the vehicle. Make sure the connection is made to bare metal and is securely fastened using the sheet metal screw provided.

8Choke Coil with Fuse Holder (15A)

9Power Supply Connector

!Right Front (+) Speaker Output Lead (Gray)

"Right Front (–) Speaker Output Lead (Gray/Black)

#Right Rear (–) Speaker Output Lead (Violet/Black)

$ Right Rear (+) Speaker Output Lead (Violet)

%Left Rear (+) Speaker Output Lead (Green)

&Left Rear (–) Speaker Output Lead (Green/Black)

( Left Front (–) Speaker Output Lead (White/Black) ) Left Front (+) Speaker Output Lead (White)

~Ai-NET Connector

Connect this to the output or input connector of another device (CD Changer, Equalizer, etc.) equipped with Ai-NET.

You can input TV/video sound by connecting an optional Ai- NET/RCA Interface cable (KCA-121B) to this component.

+Ai-NET Cable (Included with CD Changer)

,Front Output RCA Connectors

RED is right and WHITE is left.

-Rear Output RCA Connectors

RED is right and WHITE is left.

. Subwoofer RCA Connectors

RED is right and WHITE is left.

/RCA Extension Cable (sold separately)

:System Switch

When connecting a processor or divider using Ai-NET, place this switch in the EQ/DIV position. When no device is connected, leave the switch in the NORM position.

Be sure to turn the power off to the unit before changing the switch position.

To prevent noise/interference in the audio system.

Locate the unit and route the leads at least 10 cm away from the car harness.

Keep the battery power leads as far away from other leads as possible.

Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis.

If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various noise suppressors, contact them for further information.

Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.

37-EN

Image 39
Contents CDA-9815 CDA-9813 CDA-9811 CHA-1214CHM-S630 CHA-S634Contents Installation and Connections Operating Instructions Never Attempt the Following Alphanumeric Display On handling Compact Discs CD/CD-R/CD-RWGetting Started Detaching and Attaching the Front Panel Adjusting VolumeLowering Volume Quickly Changing the Audio Level Display PatternRadio Playback CD / MP3 / WMAStation Title Search Function Quick Search Function10-EN Press 5 in the play or pause modeRepeat Play X. Random PlayQuick Search File Search modeFolder Search mode Scanning Programs12-EN TerminologyPress Rotary encoder repeatedly to choose the desired mode Sound SettingSetting the Bass Control CDA-9811 only Setting the Treble Control CDA-9811 onlySetting the Bass Type CDA-9811 only Adjusting the built-in Crossover CDA-9811 only14-EN 15-EN 16-EN WAY System17-EN About Time CorrectionExample 1. Listening Position Front Left Seat Example 2. Listening Position All Seats18-EN Example setting for steps 2Press T.CORR/X-OVER to select the Bass Focus mode Bass Focus19-EN Setting the MX ModePress BAND/TEL. to select a speaker to be adjusted Press Rotary encoder to return to normal modePress Title Other FunctionsDisplaying the Title/Text 20-ENDisplaying Time Blackout Mode On and OffTitling Discs/Stations Erasing Disc Title/Station Title22-EN PersonalizeAbout i-Personalize Data DownloadingSound Customizing Visual Customizing23-EN 24-EN External DeviceChecking the XM Radio ID Number Storing XM Channel PresetsXM Radio Optional Receiving XM Channels with the XM Receiver OptionalChanging the Display Setting the tuning methodSetting the Auxiliary Data Field Display Channel/Category Search FunctionIncoming Calls Telephone Mode ON/OFFMobileHub Link OperationOptional About MobileHub LinkSMS Short Message Service Operation Press Search in Phone Book mode to select the History modeReceiving a short message Multi-Changer Selection Optional Changer OptionalPlaying MP3 Files with the CD Changer Optional Controlling CD Changer Optional30-EN Remote ControlControls on Remote Control Operating the Audio ProcessorBasic Battery ReplacementInformation Case of DifficultyIndication for CD Player Indication for CD Changer32-EN CDA-9815/CDA-9813CDA-9811 SpecificationsIndication for XM Radio Mode 33-EN34-EN Installation and ConnectionsInstallation 35-ENSlide the mounting sleeve into the dashboard 36-EN Connections for CDA-9811To prevent noise/interference in the audio system 37-EN38-EN Connections for CDA-9815/CDA-9813Audio Interrupt In Lead Pink/Black Illumination Lead Orange 39-ENPage ALPINE-1 Limited Warranty