Alpine CDA-9811, CDA-9813, CDA-9815 Indication for CD Player, Indication for CD Changer, 32-EN

Page 34

CD insertion not possible.

•A CD is already in the CD player.

-Eject the CD and remove it.

•The CD is being improperly inserted.

-Make sure the CD is being inserted following instructions in the CD Player Operation section.

Unable to fast forward or backward the CD.

•The CD has been damaged.

-Eject the CD and discard it; using a damaged CD in your unit can cause damage to the mechanism.

CD playback sound skips due to vibration.

•Improper mounting of the unit.

-Securely re-mount the unit.

•The disc is very dirty.

-Clean the disc.

•The disc has scratches.

-Change the disc.

•The pick-up lens is dirty.

-Do not use a commercial available lens cleaner disc. Consult your nearest ALPINE dealer.

CD playback sound skips without vibration.

•The disc is dirty or scratched.

- Clean the disc; damaged disc should be replaced.

Error displays (built-in CD player only)

•Mechanical error

-Press c. After the error indication disappears, insert the disc again. If the above-mentioned solution does not solve the problem, consult your nearest ALPINE dealer.

CD-R/CD-RW playback not possible

•Close session (finalization) has not been performed. - Perform finalization and attempt playback again.

MP3/WMA

MP3 or WMA is not played back.

•Writing error occurred. The CD format is not compatible.

-Make sure the CD has been written in a supported format. Refer to “About MP3/WMA” (page 11-12), then rewrite in the format supported by this device.

Indication for CD Player

HIGH TEMP

 

HI TEMP

(CDA-9815)(CDA-9813/CDA-9811)

•Protective circuit is activated due to high temperature.

-The indicator will disappear when the temperature returns to within operation range.

NO DISC

•No CD is inserted.

-Insert a CD.

•Although a disc is inserted, “NO DISC” is displayed and the unit does not start to play or eject the disc.

-Remove the disc by following these steps:

1)Press the c button.

The movable display will open.

2)Press the c button again for at least 3 seconds while the movable display is open.

ERROR

•Mechanism error.

1)Press the c button and eject the CD.

If not ejecting, consult your Alpine dealer.

2)When the error indication remains after ejecting, press the c button again.

If the error indication still does not turn off after pressing the c button for a few times, consult your Alpine dealer.

•When “ERROR” is displayed:

If that the disc cannot be ejected by pressing c, press the RESET switch (refer to page 6) and press c again.

If the disc still cannot be ejected, consult your Alpine dealer.

PROTECT

•A copy-protected WMA file was played back.

- You can only play back non-copy-protected files.

UNSUPPORT UNSUPORT

(CDA-9815/CDA-9813)(CDA-9811)

•The disc is not written in a MP3/WMA supported format. - Use a disc written at the MP3/WMA supported format.

Indication for CD Changer

HIGH TEMP

 

HI TEMP

 

(CDA-9815)

(CDA-9813/CDA-9811)

•Protective circuit is activated due to high temperature.

-The indicator will disappear when the temperature returns to within operation range.

ERROR - 01

•Malfunction in the CD Changer.

-Consult your Alpine dealer. Press the magazine eject button and pull out the magazine.

Check the indication. Insert the magazine again.

If the magazine cannot be pulled out, consult your Alpine dealer.

•Magazine ejection not possible.

-Press the magazine eject button. If the magazine does not eject, consult your Alpine dealer.

ERROR - 02

•A disc is left inside the CD Changer.

-Press the eject button to activate the eject function. When the CD Changer finishes the eject function, insert an empty CD magazine into the CD Changer to receive the disc left inside the CD Changer.

NO MAGAZINE NO MAGZINE

(CDA-9815)(CDA-9813)

NO MAGZN

(CDA-9811)

•No magazine is loaded into the CD Changer. - Insert a magazine.

32-EN

Page 33 Page 35
Image 34
Page 33 Page 35
Contents CDA-9815 CDA-9813 CDA-9811 CHA-S634 CHA-1214CHM-S630Contents Installation and Connections Operating Instructions Never Attempt the Following On handling Compact Discs CD/CD-R/CD-RW Alphanumeric DisplayGetting Started Changing the Audio Level Display Pattern Adjusting VolumeLowering Volume Quickly Detaching and Attaching the Front PanelRadio Quick Search Function CD / MP3 / WMAStation Title Search Function PlaybackX. Random Play Press 5 in the play or pause modeRepeat Play 10-ENScanning Programs File Search modeFolder Search mode Quick SearchTerminology 12-ENSetting the Treble Control CDA-9811 only Sound SettingSetting the Bass Control CDA-9811 only Press Rotary encoder repeatedly to choose the desired modeAdjusting the built-in Crossover CDA-9811 only Setting the Bass Type CDA-9811 only14-EN 15-EN WAY System 16-ENExample 2. Listening Position All Seats About Time CorrectionExample 1. Listening Position Front Left Seat 17-ENBass Focus Example setting for steps 2Press T.CORR/X-OVER to select the Bass Focus mode 18-ENPress Rotary encoder to return to normal mode Setting the MX ModePress BAND/TEL. to select a speaker to be adjusted 19-EN20-EN Other FunctionsDisplaying the Title/Text Press TitleErasing Disc Title/Station Title Blackout Mode On and OffTitling Discs/Stations Displaying TimeData Downloading PersonalizeAbout i-Personalize 22-ENVisual Customizing Sound Customizing23-EN External Device 24-ENReceiving XM Channels with the XM Receiver Optional Storing XM Channel PresetsXM Radio Optional Checking the XM Radio ID NumberChannel/Category Search Function Setting the tuning methodSetting the Auxiliary Data Field Display Changing the DisplayAbout MobileHub Link Telephone Mode ON/OFFMobileHub Link OperationOptional Incoming CallsPress Search in Phone Book mode to select the History mode SMS Short Message Service OperationReceiving a short message Controlling CD Changer Optional Changer OptionalPlaying MP3 Files with the CD Changer Optional Multi-Changer Selection OptionalOperating the Audio Processor Remote ControlControls on Remote Control 30-ENCase of Difficulty Battery ReplacementInformation BasicIndication for CD Changer Indication for CD Player32-EN 33-EN SpecificationsIndication for XM Radio Mode CDA-9815/CDA-9813CDA-9811Installation and Connections 34-EN35-EN InstallationSlide the mounting sleeve into the dashboard Connections for CDA-9811 36-EN37-EN To prevent noise/interference in the audio systemConnections for CDA-9815/CDA-9813 38-EN39-EN Audio Interrupt In Lead Pink/Black Illumination Lead OrangePage Limited Warranty ALPINE-1
Top Page Image Contents