Aiwa CT-X421 operating instructions Precautions, Table of Contents

Page 2

PRECAUTIONS

Use only in a 12-volt DC negative-ground electrical system.

Disconnect the vehicle’s negative battery terminal while mounting and connecting the unit.

When replacing the fuse, be sure to use one with an identical amperage rating. Using a fuse with a higher amperage rating may cause serious damage to the unit.

Keep screwdrivers, etc. and other metallic or magnetic objects away from the playback head.

When your vehicle has been parked in direct sunlight resulting in a considerable rise in the temperature inside, allow the unit to cool off before operating it.

Keep the volume at a level at which you can hear outside warning sounds (horns, sirens, etc.).

NOTE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

CAUTION

Modifications or adjustments to this product, which are not expressly approved by the manufacturer, may void the user’s right or authority to operate this product.

TABLE OF CONTENTS

 

THEFT PROTECTION

2

BASIC OPERATION, AUDIO AND CLOCK

 

ADJUSTMENT

2

RADIO OPERATION

3

TAPE PLAYBACK

5

AUXILIARY EQUIPMENT

6

MAINTENANCE

6

SPECIFICATIONS

7

Note

Some buttons are assigned two or more functions. For detailed descriptions, refer to the related pages.

Notes on cassettes

Do NOT expose cassettes to direct sunlight, extremely high or cold temperature or moisture.

Keep cassettes away from equipment with built-in magnets to avoid unwanted noise or loss of sound quality.

Do NOT touch the tape of a cassette, as any dirt or dust will contaminate the heads.

Be sure to remove any cassette from the unit if you are not using it.

Caution on the transit protection pad

Be sure to remove the pad before operating the unit.

Transit protection pad

1 ENGLISH

Image 2
Contents CT-X421 YU Precautions Table of ContentsBasic OPERATION, Audio and Clock Adjustment Theft ProtectionRadio Operation Presetting stations manually Using preset stationsPresetting stations automatically Tuning in to a preset stationPress G simultaneously Tape PlaybackPlaying a tape