Aiwa CT-X421 operating instructions Theft Protection, Basic OPERATION, Audio and Clock Adjustment

Page 3

THEFT PROTECTION

Take the front panel with you when leaving the car, and keep it in the supplied carrying case.

Detaching the front panel

Before detaching the front panel, remove the cassette to prevent possible damage to the unit.

1Press z to remove the cassette.

2Press and hold PWR/MUTE until the unit turns off.

3Press %. (Hold the panel with one hand to prevent accidentally dropping it.)

4Remove the panel.

BASIC OPERATION, AUDIO AND CLOCK ADJUSTMENT

Smart Jog

Attaching the front panel

1Engage the left side of the front panel to the left catch on the unit.

2Push the panel forward until it locks. Be sure not to press any buttons while you are attaching the panel.

Note

Do not touch the front panel connector. This could cause a poor or faulty connection.

Security lamp

The security lamp will continue to flash while the front panel is detached from the unit.

Turning the unit on/off

Press PWR/MUTE to turn on the unit. The unit also turns on when you insert a cassette.

Press and hold PWR/MUTE until the unit turns off.

Note

Most operations described in this manual require the unit to be turned on before starting the operation, unless explicitly stated otherwise.

Changing the source mode

1Press FNC.

Pressing FNC cycles through source modes in the following order:

FM1FM2FM3AM1

AM2

*Tape Play mode (available while a cassette is in the unit)

Adjusting the volume

1 Turn the Smart Jog. VOL (volume) indicator flashes.

Muting the sound

1Press PWR/MUTE briefly.

To restore volume, briefly press PWR/MUTE again.

ENGLISH

ENGLISH 2

Image 3
Contents CT-X421 YU Table of Contents PrecautionsTheft Protection Basic OPERATION, Audio and Clock AdjustmentRadio Operation Tuning in to a preset station Using preset stationsPresetting stations automatically Presetting stations manuallyTape Playback Playing a tapePress G simultaneously