Installation
If thefreezer compartment door islowerthanthe refrigerator compartment door
If thefreezer compartment door is higher thanthe refrigerator compartment door
-first method
If thefreezer compartment door ishigher thanthe refrigerator compartment door
- second method
CAUTION
After leveling the door height
Height adjustment
Make them level by inserting flat (- type) driver into the groove of the left height adjusting screw and rotating it clockwise ( 
).
Make them level by inserting flat (- type) driver into the groove of the right height adjusting screw and rotating it clockwise ( 
).
Adjust the level when the refrigerator door is lower than the freezer door during the use of the refrigerator.
Keeper nut
Tool for
adjustment
Adjustment 
Up hinge pin
Down 
1.Using the wide side of the tool for adjustment 
, turn the keeper nut 
( 
) clockwise to loosen the keeper nut.
2.Using the narrow side of the tool for adjustment, turn the adjustment hinge pin
( 
) clockwise or ( 
) counterclockwise to level the refrigerator and freezer door.
3.After setting the level of the door, turn the keeper nut(
) counterclockwise to tighten.
Do not force too hard to level the height. The hinge pin can be pulled out. (Adjustable range of height is a maximum of 2" (5 cm))
The refrigerator door will close smoothly by raising the front side by adjusting the height adjusting screw. If the door does not close properly because it is improperly adjusted, the performance of the refrigerator will be affected.
12
