Installation
Where water supply can be easily connected in a dry place
Select a place where a water supply can be easily connected between the automatic ice maker and dispenser.
Installing the refrigerator in a wet or damp area may cause rust and may be an electrical hazard.
Bottom Pad
Where it is free from heat
7
If this refrigerator is installed where the ambient temperature is high, the freezing capacity is deteriorated and the cost of electricity used increases.
NOTE
•Install the refrigerator at a place where the ambient temperature is 5˚C ~ 43˚C (41˚F~110˚F).
Ambient temperature outside this range may cause product malfunction. Also, the tube between the dispenser and automatic ice maker may freeze.
Method to remove protection film(Some Model)
1.Grasp the handles with both hands and push them upward to remove.
2.Entirely remove the protection film adhered to the external surface of the door.
3.Assemble the fixing bracket on both ends of the handle to the fixing bolt of the door and lower the handle downward until it is entirely fixed.
6