Xerox 3300MFP manual Other ways to fax, Printing received faxes on both sides of paper

Printing received faxes on both sides of paper

By using the Duplex button on your machine, you can set the machine to print received faxes on both sides of paper.

1Press Duplex.

2Press the Scroll buttons until the binding option you want appears.

•Off: Prints in Normal mode.

•1->2Side Short: Prints pages to be read by flipping like a note pad.

•1->2Side Long: Prints pages to be read like a book.

7Enter the second fax number and press Enter.

The display asks you to enter another fax number to send the document.

8To enter more fax numbers, press Enter when Yes appears and repeat steps 6 and 7. You can add up to 209 destinations.

Note

You cannot use group dial numbers for another fax number.

9 When you have finished entering fax numbers, select No at the

Another No.? prompt and press Enter or Start.

The original is scanned into memory before transmission. The

display shows memory capacity and the number of pages being

3

2 5

1->2Side Long

2

3

5

1->2Side Short

stored in memory.

10 If an original is placed on the scanner glass, select Yes to add

another page. Load another original and press Enter.

When you have finished, select No at the Another Page? prompt.

The machine begins sending the fax to the numbers you entered in

the order in which you entered them.

3Press Enter to save your selection.

If the mode is enabled, the Duplex button is backlit.

Other ways to fax

Sending a fax to multiple destinations

You can use the Multiple Send feature, which allows you to send a fax to multiple locations. Originals are automatically stored in memory and sent to a remote station. After transmission, the originals are automatically erased from memory.

1Press Fax.

2Load originals face up into the ADF, or place a single original face down on the scanner glass.

For details about loading an original, see page 5.1.

3Adjust the document resolution and darkness to suit your fax needs. See page 9.1.

4Press Menu until Fax Feature appears on the bottom line of the display and press Enter.

5Press the Scroll buttons until Multi Send appears and press Enter.

6Enter the number of the first receiving fax machine and press Enter.

You can use speed buttons, speed dial numbers, or group dial numbers. For details, see page 10.2.

Sending a delayed fax

You can set your machine to send a fax at a later time when you will not be present.

1Press Fax.

2Load originals face up into the ADF, or place a single original face down on the scanner glass.

For details about loading an original, see page 5.1.

3Adjust the document resolution and darkness to suit your fax needs. See page 9.1.

4Press Menu until Fax Feature appears on the bottom line of the display and press Enter.

5Press the Scroll buttons until Delay Send appears and press Enter.

6Enter the number of the receiving machine using the number keypad.

You can use speed buttons, speed dial numbers, or group dial numbers. For details, see page 10.2.

7Press Enter to confirm the number. The display asks you to enter another fax number to which to send the document.

8To enter more fax numbers, press Enter when Yes appears and repeat steps 6 and 7. You can add up to 10 destinations.

9.6 <Faxing>