Xerox 3300MFP manual Copying on both sides of paper, Setting copy timeout, Clone copying

Clone copying

Your machine can print multiple image copies from the original document on a single page. The number of images is automatically determined by the original image and paper size.

This copy feature is available only when you place originals on the scanner glass.

1	Press Copy.
2	Place a single original face down on the scanner
	glass.
	For details about loading an original, see

Copying on both sides of paper

By using the Duplex button on your machine, you can set the machine to image on both sides of paper.

1Press Duplex.

2Press the Scroll buttons until the binding option you want appears.

•Off: Prints in Normal mode.

•1->2Side Short: Prints pages to be read by flipping like a note pad.

•1->2Side Long: Prints pages to be read like a book.

	page 5.1.
3	Press Menu until Copy Feature appears on the
	bottom line of the display and press Enter.
4	Press the Scroll buttons until Clone Copy
	appears and press Enter.
5	Press the Scroll buttons to select Yes.
6	Press Enter or Start to begin copying.

3

2 5

1->2Side Long

2

3

5

1->2Side Short

Note

You cannot adjust the copy size using the Reduce/Enlarge button while making a clone copy.

Erasing background images

You can set the machine to print an image without its background. This copy feature removes the background color and can be helpful when copying an original containing color in the background, such as a newspaper or a catalog.

1Press Copy.

2Load originals face up into the ADF, or place a single original face down on the scanner glass.

For details about loading an original, see page 5.1.

3Press Menu until Copy Feature appears on the bottom line of the display and press Enter.

4Press the Scroll buttons until Erase Bkgd. appears and press Enter.

5Press the Scroll buttons to select On and press Enter.

6Press Stop/Clear to return to Standby mode.

7Enter the number of copies using the number keypad.

8Press Start to begin copying.

3Press Enter to save your selection.

If the mode is enabled, the Duplex button is backlit.

4Start copying a document.

Setting copy timeout

You can set the time the machine waits before it restores the default copy settings, if you do not start copying after changing them on the control panel.

1Press Menu until System Setup appears on the bottom line of the display and press Enter.

2Press Enter when Machine Setup appears.

3Press the Scroll buttons until Timeout appears and press Enter.

4Press the Scroll buttons until the time setting you want appears.

Selecting Off means that the machine does not restore the default settings until you press Start to begin copying, or Stop/Clear to cancel.

5Press Enter to save your selection.

6Press Stop/Clear to return to Standby mode.

6.4 <Copying>