5Select your printer and click Next.
NOTE: If your printer is not already connected to the computer, the following window will appear.
•After connecting the printer, click Next.
•If you don’t want to connect the printer at this time, click Next, and No on the following screen. Then the installation will start and a test page will not be printed at the end of the installation.
•The installation window that appears in this User Guide may differ depending on the printer and interface in use.
6Select the components to be installed and click Next.
NOTE: You can change the desired installation folder by clicking [Browse].
7After the installation is finished, a window asking you to print a test page appears. If you choose to print a test page, select the checkbox and click Next.
Otherwise, just click Next and skip to step 9.
8If the test page prints out correctly, click Yes. If not, click No to reprint it.
9Click Finish.
Installing Software for Network Printing
Before you begin
Before turning on the machine:
•Confirm that an existing operational network utilizing TCP/IP is available.
•Confirm that the Ethernet cable is plugged into the machine and is connected to an operational Ethernet port on the network.
When you connect your printer to a network, you must first configure the TCP/IP settings for the printer. After you have assigned and verified the TCP/IP settings, you are ready to install the software on each computer on the network.
You can install the printer software using the typical or custom method.
Typical Installation
This is recommended for most users. All components necessary for printer operations will be installed.
1Make sure that the printer is connected to your network and powered on. For details about connecting to the network, see the supplied printer’s User Guide.
2Insert the supplied
The
If the installation window does not appear, click Start and then Run. Type X:\Setup.exe, replacing “X” with the letter which represents your drive and click OK.
If you use Windows Vista, click Start → All programs → Accessories → Run, and type X:\Setup.exe.
If the AutoPlay window appears in Windows Vista, click Run Setup.exe in Install or run program field, and click Continue in the User Account Control window.
6
Installing Printer Software in Windows
