Xerox 3300MFP manual Control panel overview

Control panel overview

1Speed buttons: Allows you to store frequently-dialed fax numbers and email addresses and enter them with the touch of a few buttons.

13Exit: Sends you back to the upper menu level.

2	16-30: Allows you to shift the speed buttons to access numbers 16	14	Lighten/Darken: Adjusts the document brightness for the current
	through 30.		copy job.
3	Address Book: Allows you to store frequently used fax numbers in	15	Original Type: Selects the document type for the current copy job.
	memory or search for stored fax numbers or email addresses. Also
	allows you to print an Address Book/Phone Book list.
4	Resolution: Adjusts the document resolution for the current fax job.	16	Reduce/Enlarge: Makes a copy smaller or larger than the original.
5	Redial/Pause: In Standby mode, redials the last number, or in Edit	17	USB Print: Allows you to directly print files stored on a USB
	mode, inserts a pause into a fax number.		Memory device when it is inserted into the USB memory port on
			the front of your machine.
6	Fax: Activates Fax mode.	18	Duplex: Allows you to print documents on both sides of the paper.
7	Copy: Activates Copy mode.	19	Toner Saver: Allows you to save on toner by using less toner in
			printing.
8	Scan: Activates Scan mode.	20	Number keypad: dials a number or enters alphanumeric characters.
9	Display: Shows the current status and prompts during an operation.	21	Manual Dial: Engages the telephone line.
10	Menu: Enters Menu mode and scrolls through the available menus.	22	Stop/Clear: Stops an operation at any time. In Standby mode,
			clears/cancels the copy options, such as the darkness, the
			document type setting, the copy size, and the number of copies.

11Scroll buttons: Scroll through the options available in the selected menu, and increase or decrease values.

23Start: Starts a job.

12Enter: Confirms the selection on the screen.

1.3 <Introduction>