To load an original into the ADF:
1Load the original face up into the ADF. Make sure that the bottom of the original stack matches the paper size marked on the document input tray.
2Adjust the document width guides to the paper size.
Note
Dust on the ADF glass may cause black lines on the printout. Always keep it clean.
Selecting print media
You can print on a variety of print media, such as plain paper, envelopes, labels, and transparencies. Always use print media that meet the guidelines for use with your machine. Print media that does not meet the guidelines outlined in this user guide may cause the following problems:
•Poor print quality
•Increased paper jams
•Premature wear on the machine.
Properties, such as weight, composition, grain, and moisture content, are important factors that affect the machine’s performance and the output quality. When you choose print materials, consider the following:
•The type, size and weight of the print media for your machine is described in following tables.
•Desired outcome: The print media you choose should be appropriate for your project.
•Brightness: Some print media are whiter than others and produce sharper, more vibrant images.
•Surface smoothness: The smoothness of the print media affects how crisp the printing looks on the paper.
Notes
• Some print media may meet all of the guidelines in this section and still not produce satisfactory results. This may be the result of improper handling, unacceptable temperature and humidity levels, or other variables over which Xerox has no control.
•Before purchasing large quantities of print media, ensure that it meets the requirements specified in this user guide.
Caution
Using print media that does not meet these specifications may cause problems, requiring repairs. Such repairs are not covered by Xerox’s warranty or service agreements.
5.2 <Loading originals and print media>
