Setting up an FTP server
To use an FTP server, you need to set up parameters for access to FTP servers using CentreWare IS.
1Enter your machine’s IP address as the URL in a browser and click Go to access the web site of your machine.
2Click Machine Settings and FTP Setup.
3Click Server List.
4Click Add.
5Select the index number, from 1 to 20.
6Enter a name in Alias for the Setup for the corresponding Server List entry. This name will be displayed on your machine.
7Select IP Address or Host Name.
8Enter the server address in dotted decimal notation or as a host name.
9Enter the server port number, from 1 to 65535. The default port number is 21.
10Put a check mark in Anonymous if you want to allow the FTP server to be accessed by unauthorized persons.
By default, this is unchecked.
11Enter the login name and password.
12Enter the location the scanned image will be stored. This is the location you have entered in the step 6.
13Click Apply.
Setting up an SMB server
To use an SMB server, you need to set up parameters for access to SMB servers using CentreWare IS.
1Enter your machine’s IP address as the URL in a browser and click Go to access the web site of your machine.
2Click Machine Settings and SMB Setup.
3Click Server List.
4Click Add.
5Select the index number, from 1 to 20.
6Enter a name in Alias for the Setup for the corresponding Server List entry. This name will be displayed on your machine.
7Select IP Address or Host Name.
8Enter the server address in dotted decimal notation or as a host name.
9Enter the server port number, from 1 to 65535.
The default port number is 139.
10Enter the share name of the server.
11Put a check mark in Anonymous if you want to allow the SMB server to be accessed by unauthorized persons.
By default, this is unchecked.
12Enter the login name and password.
13Enter the domain name of the SMB server.
14Enter the location the scanned image will be stored. This is the location you have entered in the step 6.
15Click Apply.
Scanning to a network client
Network client allows you to remotely scan an original from your network- connected machine to your computer in JPEG, TIFF, or PDF file format.
Scanning
1Make sure that your machine and the computer are connected to a network and Network Scan is running on the computer.
2Load originals face up into the ADF, or place a single original face down on the scanner glass.
For details about loading an original, see page 5.1.
3Press Scan.
4Press the Scroll buttons until NetScan appears on the bottom line of the display and press Enter.
5Enter the ID you have set in the Xerox Network Scan Manager window and press Enter.
6Enter the PIN you have set in the Xerox Network Scan Manager window and press Enter.
7If the scan destination is folder type, press the Scroll buttons until the scan setting option you want appears and press Enter. Or, press Start to immediately start scanning using the default settings.
•Scan Size: Sets the image size.
•Original Type: Sets the original document’s type.
•Resolution: Sets the image resolution.
•Scan Color: Sets the color mode.
•Scan Format: Sets the file format in which the image is to be saved. If you select TIFF or PDF, you can select to scan multiple pages.
If the scan destination is application type, go to the step 11.
8Press the Scroll buttons until the desired status appears and press Enter.
9Press Start to start scanning.
8.3 <Scanning>
