Xerox 3300MFP manual Backing up data, Managing USB memory, Printing on both sides of paper, Enter

Printing on both sides of paper

By using the Duplex button on your machine, you can set the machine to print documents on both sides of paper.

1Press Duplex.

2Press the Scroll buttons until the binding option you want appears.

•Off: Prints in Normal mode.

•1->2Side Short: Prints pages to be read by flipping like a note pad.

•1->2Side Long: Prints pages to be read like a book.

Restoring data

1	Insert the USB memory device on which the backup data is stored in
	to the USB memory port.
2	Press Menu until System Setup appears on the bottom line of the
	display and press Enter.
3	Press Enter when Machine Setup appears.
4	Press the Scroll buttons until Import Setting appears and press
	Enter.
5	Press the Scroll buttons until the data type you want appears and
	press Enter.

3

2 5

1->2Side Long

2

3

5

1->2Side Short

6	Press the Scroll buttons until the file containing the data you want to
	restore appears and press Enter.
7	Press Enter when Yes appears to restore the backup file to the
	machine.
8	Press Stop/Clear to return to Standby mode.

3Press Enter to save your selection.

If the mode is enabled, the Duplex button is backlit.

Backing up data

Data in the machine’s memory can be accidentally erased due to power failure or storage failure. Backup helps you protect your Address Book/ Phone Book entries and the system settings by storing them as backup files on a USB memory device.

Backing up data

1Insert the USB memory device into the USB memory port on your machine.

2Press Menu until System Setup appears on the bottom line of the display and press Enter.

3Press Enter when Machine Setup appears.

4Press the Scroll buttons until Export Setting appears and press Enter.

5Press the Scroll buttons until the option you want appears.

•Address Book: Backs up all Address Book/Phone Book entries.

•Setup Data: Backs up all system settings.

6Press Enter to begin backing up the data. The data is backed up to the USB memory.

7Press Stop/Clear to return to Standby mode.

Managing USB memory

You can delete image files stored on a USB memory device one by one or all at once by reformatting the device.

Caution

After deleting files or reformatting a USB memory device, files cannot be restored. Therefore, confirm that you no longer need the data before deleting it.

Deleting an image file

1 Insert the USB memory device into the USB memory port on your machine.

2 Press Scan.

3 Press Enter when Scan to USB appears on the bottom line of the display.

4 Press the Scroll buttons until File Manage appears and press Enter.

5 Press Enter when Delete appears.

6 Press the Scroll buttons until the folder or file you want appears and press Enter.

Note

If you see D in the front of a folder name, there are one or more folders in the selected folder.

If you selected a file, the display shows the size of the file for about 2 seconds. Go to the next step.

11.3 <Using USB flash memory>