Note
You cannot use group dial numbers for another fax number.
9When you have finished entering fax numbers, press the Scroll buttons to select No at the Another No.? prompt and press Enter.
10Enter the job name you want and press Enter.
For details on how to enter alphanumeric characters, see page 2.3. If you do not want to assign a name, skip this step.
11Enter the time using the number keypad and press Enter or Start.
Note
If you set a time earlier than the current time, the fax will be sent at that time on the following day.
The original is scanned into memory before transmission. The display shows memory capacity and the number of pages being stored in memory.
12If an original is placed on the scanner glass, select Yes to add another page. Load another original and press Enter.
When you have finished, select No at the Another Page? prompt.
The machine returns to Standby mode. The display reminds you that you are in Standby mode and that a delayed fax is set.
Adding pages to a delayed fax
You can add pages to the delayed transmissions previously reserved in your machine’s memory.
1Load the originals to be added and adjust document settings.
2Press Menu until Fax Feature appears on the bottom line of the display and press Enter.
3Press Enter when Add Page appears.
4Press the Scroll buttons until the fax job you want appears and press Enter.
The machine scans the original into memory and shows the total number of pages and the number of the added pages.
Canceling a delayed fax
1Press Menu until Fax Feature appears on the bottom line of the display and press Enter.
2Press the Scroll buttons until Cancel Job appears and press Enter.
3Press the Scroll buttons until the fax job you want appears and press Enter.
4Press Enter when Yes appears.
The selected fax is deleted from memory.
Sending a priority fax
Using the Priority Fax feature, a high priority fax can be sent ahead of reserved operations. The original is scanned into memory and immediately transmitted when the current operation is finished. In addition, priority transmission will interrupt a Multiple Send operation between stations (i.e., when the transmission to station A ends, before transmission to station B begins) or between redial attempts.
1Press Fax.
2Load originals face up into the ADF, or place a single original face down on the scanner glass.
For details about loading an original, see page 5.1.
3Adjust the document resolution and darkness to suit your fax needs. See page 9.1.
4Press Menu until Fax Feature appears on the bottom line of the display and press Enter.
5Press the Scroll buttons until Priority Send appears and press Enter.
6Enter the number of the receiving machine.
You can use speed buttons or speed dial numbers. For details, see page 10.2.
7Press Enter to confirm the number.
8Enter the job name you want and press Enter.
The original is scanned into memory before transmission. The display shows memory capacity and the number of pages being stored in memory.
9If an original is placed on the scanner glass, select Yes to add another page. Load another original and press Enter.
When you have finished, select No at the Another Page? prompt.
The machine shows the number being dialed and begins sending the fax.
Forwarding faxes
You can forward your incoming and outgoing faxes to another fax machine or email address.
Forwarding sent faxes to another fax machine
You can set the machine to send copies of all outgoing faxes to a specified destination, in addition to the fax numbers you entered.
1Press Fax.
2Press Menu until Fax Feature appears on the bottom line of the display and press Enter.
3Press the Scroll buttons until Forward appears and press Enter.
9.7 <Faxing>
