Xerox 3300MFP Using Your Printer with a Macintosh, Installing Software for Macintosh, Scanning

10 Using Your Printer with a Macintosh

Your machine supports Macintosh systems with a built-in USB interface or a 10/100 Base-TX network interface card. When you print a file from a Macintosh computer, you can use the PostScript driver by installing the PPD file.

NOTE: Some printers do not support a network interface. Make sure that your printer supports a network interface by referring to Printer Specifications in your Printer User Guide.

This chapter includes:

•Installing Software for Macintosh

•Setting Up the Printer

•Printing

•Scanning

Installing Software for

Macintosh

Install the Printer driver

The PostScript driver CD-ROM that came with your machine provides you with the PPD file to use the PS driver, Apple LaserWriter driver, for printing on a Macintosh computer.

Also, it provides you with the Twain driver for scanning on a Macintosh computer.

1Connect your machine to the computer using the USB cable or the Ethernet cable.

2Turn on your computer and the machine.

3Insert the PostScript driver CD-ROM which came with your machine into the CD-ROM drive.

4Double-click CD-ROM icon that appears on your Macintosh desktop.

5Double-click the MAC_Installer folder.

6Double-click the MAC_Printer folder.

7Double-click the Xerox Phaser 3300MFP_OSX icon.

8Enter the password and click OK.

9Click Continue.

10Select Easy Install and click Install.

11After the installation is finished, click Quit.

NOTE:

•After installation, you need to set up the connection between the printer and your computer. See “Setting Up the Printer” on page 38.

Uninstall the Printer driver

Uninstall is required if you are upgrading the software, or if installation fails.

1

2

3

4

5

6

7

8

9

Insert the CD-ROM which came with your printer into the CD-ROM drive.

Double-click CD-ROM icon that appears on your Macintosh desktop.

Double-click the MAC_Installer folder. Double-click the MAC_Printer folder.

Double-click the Xerox Phaser 3300MFP_OSX icon.

Enter the password and click OK.

Click Continue.

Select Uninstall and then click Uninstall.

When the uninstallation is done, click Quit.

37

Using Your Printer with a Macintosh