Calling out stored values, Defeat mode

Convenient Functions

Calling out stored values

1 Press any button from 1 to 6 to select the preset memory you want to call out (“MEMORY1” to “MEMORY6”).

In the preset memory, numerous settings/ adjustments are stored. Therefore, it may take some time to access the stored preset memory.

DEFEAT

1~6

DISP

Storing settings in the memory

LOAD I NG

PRESET MEMORY 1

NOTE

This operation can only be performed when the defeat mode is turned off.

This function can store up to 6 adjustments/ settings.

The following adjustments/settings are stored in a preset memory. For more details, see each page for the below items.

Page 4: Speakers Setting / Pages 6 - 11: Time Correction/Phase Switching/Bass Focus Setting / Pages 12 - 14: Equalizer Adjustment / Pages 15 -

17:X OVER Adjustment / Pages 18 - 19: MX Settings / Page 19: BASS COMP. Setting / Page

20:Pro Logic II Mode Setting/Centre Width Adjustment* / Pages 21 - 25: Dolby Surround adjustment* / Page 26: Linear PCM Setting* * Depending on the signal input, there is no

effect.

1Make the adjustment or setting you want to store in the memory.

2Press and hold any button from 1 to 6 for at least 2 seconds to store the setting into preset memory (“MEMORY1” to “MEMORY6”).

Defeat mode

1 Press the DEFEAT button. All properties are made flat.

DEFEAT ON

2 Press the DEFEAT button again to cancel.

NOTES

•The “Parametric EQ”, “Graphic EQ”, “AUTO TCR”, “TCR/phase switching”, “MX”, “X-OVER” and “BASS COMP. setting” operations cannot be performed when the defeat mode is turned on.

•To protect the speakers, the “X-OVER” setting does not change.

SAVE

PRESET MEMORY 2

NOTES

•This operation can only be performed when the defeat mode is turned off.

•The stored contents will not be deleted even when the battery power cord is detached.

28-EN