Basic Operation
CHANNEL
ENTER
SETUP
Rotary encoder
PRO LOGIC II indicator
Dolby Digital indicator
DTS indicator
Turning the power on and off
This unit does not have a power switch. The head unit to which the unit is connected, controls its power.
NOTE
When the power is turned ON for the first time, the SETUP mode is automatically activated.
About indicators
•PRO LOGIC II indicator
Lights amber in the Dolby Surround decode mode
•Dolby Digital indicator
Lights amber in the Dolby Digital decode mode
•DTS indicator
Lights amber in the DTS decode mode
Operating the Rotary encoder
This unit uses the Rotary encoder when establishing settings or adjustments. When operating with the Rotary encoder, press the Rotary encoder and startup the Rotary encoder before the operation.
Setting the speakers
First make the speaker settings.
Turn off speaker channels that are not connected.
1
2 Turn the Rotary encoder to select the “SPEAKER SELECT” mode, then press the ENTER button.
3 Press the CHANNEL button to select the speaker, then press the ENTER button.
F1 | F2 | R |
(Front 1) (Front 2) | (Rear) | |
Sub. W |
| Ct |
(Subwoofer) | (Centre) | |
4 Turn the Rotary encoder to set the speaker type ON or OFF, then press the ENTER button. Repeat steps 3 and 4 to set all unconnected speaker channels to “OFF”.
F1 (Front 1): Tw (Tweeter)/Full (Full Range)/OFF
F2 (Front 2): Full (Full Range)/OFF
R (Rear) : | ON/OFF |
Ct (Centre) : | Centre/Sub.W (Subwoofer)/OFF |
NOTE
Set to “Subwoofer” when a subwoofer is connected to the centre speaker output.
Sub.W (Subwoofer) : ON/OFF
*When Full (Full Range) is selected in F1 (Front 1), the confirmation message of Tweeter presence will be displayed next. Turn the Rotary encoder and select YES/ NO, then press the ENTER button. Please set to protect the speakers.
5 Press the SETUP button repeatedly to quit the setup mode.