Alpine TME-M770 owner manual Precautions

Page 5

CAUTION

This symbol means important instructions. Failure to heed them can result in injury or material property damage.

HALT USE IMMEDIATELY IF A PROBLEM APPEARS.

Failure to do so may cause personal injury or damage to the product. Return it to your authorized Alpine dealer or the nearest Alpine Service Centre for repairing.

PRECAUTIONS

Temperature

Be sure the temperature inside the vehicle is between

+45°C (+113°F) and 0°C (+32°F) before turning your unit on.

Fuse Replacement

When replacing the fuse(s), the replacement must be of the same amperage as shown on the fuse holder. If the fuse(s) blows more than once, carefully check all electrical connections for shorted circuitry. Also have your vehicle’s voltage regulator checked.

Maintenance

If you have problems, do not attempt to repair the unit yourself. Return it to your Alpine dealer or the nearest Alpine Service Station for servicing.

Installation Location

Make sure the TME-M770 will not be exposed to:

Direct sun and heat

High humidity

Excessive dust

Excessive vibrations

After turning the system off, a slight ghost of the image will remain temporarily. This is an effect peculiar to LCD technology and is normal.

Under cold temperature conditions, the screen may lose contrast temporarily. After a short warm-up period, it will return to normal.

About the Touch Switch

To protect the display, lightly touch the screen with the tip of your finger.

If there is no response from the switch, then move your finger away from the screen and touch again.

3-EN

Image 5
Contents TME-M770 Page Contents USE the Correct Ampere Rating When Replacing Fuses Precautions Screen Display ON/OFF Switching the SourceAdjusting the Volume Setup Operation Other Useful FeaturesOther Useful Features Touch Visual EQ Visual Eqtm OperationOperating a DVD in the IVA-D300 series Changing to Another Product’s SourceOperating Other Products If a TV is operated a TV tuner is connected Operating the DVA-5210 and the DHA-S680 seriesCase of Difficulty SpecificationsInstallation and Connections Precautions Attaching with screws Installing AV Interface UnitVelcro fastener Mounting Main unit Main unit attachment fitting Attaching the monitor and stand15-EN Basic connection ConnectionsVideo input connector AUX ACC power lead RedVideo input connectors AUX Audio output connectorsSold separately System ConnectionsMain unit and head unit IVA-D300 series Page GERÄTE-PASS Händlerstemple Page Appendix Français Italiano Q9 no Luftport