Alpine TME-M770 owner manual Switching the Source, Screen Display ON/OFF, Adjusting the Volume

Page 6

Basic Operation

Switching the Source

Main power lamp

POWER (VOLUME DOWN) (VOLUME UP)

Illumination sensor

Screen Display ON/OFF

1 Press the POWER button.

2 To turn off the POWER, press the POWER button again.

If properly connected, the monitors main POWER will turn off when the vehicle's ignition switch is off. If the main power lamp illuminates in the STAND BY mode, the vehicle's battery may be discharged.

After turning the system off, a slight ghost of the image will remain temporarily. This is an effect peculiar to LCD technology and is normal.

Under cold temperature conditions, the screen may lose contrast temporarily. After a short warm-up period, it will return to normal.

Adjusting the Volume

1 Adjust the volume level by pressing the or button.

1 Touch the option part of the display to display each source operation screen or source selection screen.

2 If each source operation screen is displayed, touch CONTROL on the upper right side of the screen to display the source selection screen.

The source selection screen is displayed by touching “CONTROL” as described below, depending on the current source.

When touched while the current source is GAME, AUX 1 or AUX 2 : Source selection screen

When touched while the current source is EXT.DVD: EXT.DVD operation screen Source selection screen

When touched while the current source is TV: TV operation screen Source selection screen

When touched while the current source is LINK: AUDIO operation screen EXT.DVD operation screen TV operation screen Source selection screen

3 Touch the source (NAV. / AUX 1/ AUX 2) you want to view.

SOURCE CONTROL

NAV.

 

AUX 1

 

AUX 2

 

SETUP

 

VISUAL

 

SOURCE

 

P 1/2

 

 

 

 

EQ

 

 

The AUX 1, AUX 2 source name changes to the selected mode name in the next item “SETUP operation” - “6External input name setting”. Also, “NAV.” is only displayed when “7 Navigation Settings” in following section, “Setup Operation”, is set to “ON”.

The operation screens for the different sources as well as the source selection screen turn off automatically if no operation is performed for 5 seconds.

4-EN

Image 6
Contents TME-M770 Page Contents USE the Correct Ampere Rating When Replacing Fuses Precautions Switching the Source Adjusting the VolumeScreen Display ON/OFF Other Useful Features Setup OperationOther Useful Features Visual Eqtm Operation Touch Visual EQChanging to Another Product’s Source Operating Other ProductsOperating a DVD in the IVA-D300 series Operating the DVA-5210 and the DHA-S680 series If a TV is operated a TV tuner is connectedSpecifications Case of DifficultyInstallation and Connections Precautions Installing AV Interface Unit Velcro fastener MountingAttaching with screws Attaching the monitor and stand Main unit Main unit attachment fitting15-EN Connections Basic connectionVideo input connectors AUX ACC power lead RedVideo input connector AUX Audio output connectorsSystem Connections Sold separatelyMain unit and head unit IVA-D300 series Page GERÄTE-PASS Händlerstemple Page Appendix Français Italiano Q9 no Luftport