Visual Eqtm Operation, Touch Visual EQ

VISUAL EQTM Operation

1 Touch the option part of the display to display each source operation screen or source selection screen.

2 If each source operation screen is displayed, touch CONTROL on the upper right side of the screen to display the source selection screen.

3 Touch VISUAL EQ.

4 Select the desired setting by touching or .

5 Change the selected setting by touching or .

VISUAL EQ

VISUAL EQ MODE		OFF

RETURN

1VISUAL EQ mode (manufacturer’s settings) selection (VISUAL EQ MODE)

OFF	: Default setting.
NIGHT M.	: Suitable for movies with a lot of
	dark scenes.
SOFT	: Suitable for movies with
	computer graphics or
	animation.
SHARP	: Suitable for old movies whose
	resolution is unclear.

CONTRAST: Suitable for the latest movies.

P.SET-1, 2 : Accesses the preset number stored in step “7 Storing”.

•To return to the default values after selecting one of the modes between “NIGHT M.” and “CONTRAST” then adjusting the image brightness, color density and so on to suit your tastes, set this function to “OFF”.

2Brightness adjustment (BRIGHT)

Allows the brightness (–15 (MIN)~+15 (MAX)) of the picture.

3Color depth adjustment (COLOR)

Change depth can be adjusted from –15 (MIN) to +15 (MAX).

*Adjustment cannot be made in the NAVIGATION (RGB connection) mode.

4Tint tone adjustment (TINT)

Tint tone can be adjusted from G15 (G MAX) to R15 (R MAX).

*Adjustment cannot be made in the NAVIGATION (RGB connection) mode.

5Contrast adjustment (CONTRAST)

Contrast can be adjusted from –15 (LOW) to +15 (HIGH).

6Screen quality adjustment (SHARP)

Screen quality can be adjusted from –15 (SOFT) to +15 (HARD).

7Storing (USER MEMORY)

You can store the settings adjusted in steps 2 to 6 in the following way.

1)Touch or from USER MEMORY after adjusting settings 2 to 6, and select the preset number you want to store in (P.SET-1, 2).

2)After selecting the preset No., touch “WRITE”.

•P.SET-1, 2 stored here can be accessed from “1 VISUAL EQ mode selection”.

•If 2 to 6 are adjusted, VISUAL EQ mode in 1 changes to “CUSTOM”.

6 When setting is completed, touch RETURN. The screen changes to the source selection screen.

7-EN