Alpine CDM-9801, cdm-9803 owner manual Specifications, Indication for CD

Page 15

Indication for CD

– – – H

Protective circuit is activated due to high temperature.

-The indicator will disappear when the temperature returns to within operation range.

– – – E

Mechanism error.

1.Press the c button and eject the CD.

If not ejecting, consult your Alpine dealer.

2.When the error indication remains after ejecting, press the c button again.

If the error indication still does not turn off after pressing the c button for a few times, consult your Alpine dealer.

Note

When the "- - - E" is displayed:

In case that the disc cannot be ejected by pressing the c button, press the RESET switch (refer to page 4) and press the c button again.

If not ejecting, consult your Alpine dealer.

T – – –

No CD is inserted. - Insert a CD.

Indication for CD Changer

– – H

Protective circuit is activated due to high temperature.

-The indicator will disappear when the temperature returns to within operation range.

E - 01

Malfunction in the CD Changer.

-Consult your Alpine dealer. Press the magazine eject button and pull out the magazine.

Check the indication. Insert the magazine again. If the magazine cannot be pulled out, consult your Alpine dealer.

Magazine ejection not possible.

-Press the magazine eject button. If the magazine does not eject, consult your Alpine dealer.

– – – –

No magazine is loaded into the CD Changer. - Insert a magazine.

T – – –

No indicated disc.

- Choose another disc.

E E E E

Specifications

FM TUNER SECTION

Tuning Range

87.7 – 107.9 MHz

Mono Usable Sensitivity

9.3 dBf (0.8 µV/75 ohms)

50 dB Quieting Sensitivity

13.5 dBf (1.3 µV/75 ohms)

Alternate Channel Selectivity

80 dB

Signal-to-Noise Ratio

65 dB

Stereo Separation

35 dB

Capture Ratio

2.0 dB

AM TUNER SECTION

 

Tuning Range

530 – 1,710 kHz

Sensitivity (IEC Standard)

22.5 µV/27 dB

CD PLAYER SECTION

 

Frequency Response

5 – 20,000 Hz (±1 dB)

Wow & Flutter (% WRMS)

Bleow measurable limits

Total Harmonic Distortion

0.008% (at 1 kHz)

Dynamic Range

95 dB (at 1 kHz)

Signal-to-Noise Ratio

105 dB

Channel Separation

85 dB (at 1 kHz)

PICKUP

 

Wave length

795 nm

Laser power

CLASS I

GENERAL

 

Power Requirement

14.4 V DC

 

(11–16 V allowable)

Maximum Power Output

50 W 4 (CDM-9803 only)

 

45 W 4 (CDM-9801 only)

Maximum Pre-Output Voltage 2 V/10 k ohms

Bass

±14 dB at 60 Hz

Treble

±14 dB at 10 kHz

Weight

1.5 kg (3 lbs. 5 oz)

CHASSIS SIZE

 

Width

178 mm (7")

Height

50 mm (2")

Depth

160 mm (6-1/4")

NOSEPIECE SIZE

 

Width

170 mm (6–3/4")

Height

46 mm (1-13/16")

Depth

20 mm (11/16")

Due to continuous product improvement, specifications and

Misconnection or disconnection of CD Changer.

- Check connection between CD Changer and control

unit.

13-EN

 

Image 15
Contents CDM-9803 CDM-9801 CHA-S634CHA-1214CHM-S630 Alpine CD Changers Give You MoreContents Damaged Disc TemperatureMaintenance Moisture CondensationNever Attempt the Following Installation LocationDisc Cleaning Disc AccessoriesBasic Operation Audio Mute Function Setting the AUX ModeSetting Time Setting the Bass ControlDisplaying Time Setting the Treble Control Setting the Bass Type Press and hold the Preset buttons 1 through Manual TuningAutomatic Seek Tuning Manual Storing of Station PresetsTuning to Preset Stations Automatic Memory of Station Presets4 5 About the usable discs To customers using CD-R/CD-RWInserting/Ejecting Disc Normal Play and PauseX. Random Play Music Sensor SkipFast Forward and Backward Repeat PlayCase of Difficulty InformationIndication for CD SpecificationsPrecautions Installation and ConnectionsRemoval InstallationCD Changer Sold Separately ConnectionsTo prevent external noise from entering the audio system Switched Power Lead Ignition RedLimited Warranty Page