Setting the Treble Control |
| Setting the Bass Type |
You can change the Treble Frequency emphasis to create your own tonal preference.
1 Press the CENTER f button to select the Treble setting mode.
Each press changes the modes as follows:
→Bassmodesetting → Treblemode setting → Normalmode
Press g or f button to select the desired Treble center frequency.
10kHz ↔ 12.5kHz ↔ 15kHz ↔ 17.5kHz
Emphasizes the displayed Treble frequency ranges.
Turn the Rotary encoder to select the desired Treble Level
You can emphasize the treble frequency.
NOTES
•If no buttons are pressed within 15 seconds, the Treble control setting will be turned off automatically.
•The settings of the Treble Level will be individually memorized for each source (FM, AM and CD) until the setting is changed. The Treble frequency settings adjusted for one source are effective for all other sources (FM, AM and CD).
This function allows for 3 different Bass type settings. Select the one that appeals to you the most.
1 Press and hold the CENTER f button for at least 2 seconds to set the Bass Type.
2 Select the desired type (1 through 3) by pressing the g or f button within 15 seconds.
Type 1 will sound best if you have a subwoofer in your system. Use Type 2 or 3 if you are using small diameter speakers.
3 Press the CENTER f button for at least 2 seconds to return to the normal mode.
NOTES
•“Bass Center Frequency” and “Bass Band Width” previously set are replaced when selecting TYPE 1 through 3. When Bass Type is OFF, your previous settings are restored.
•If you connect an external audio processor, the setting cannot be carried out.