Basic Operation
BAND | Rotary encoder |
g f CENTER f | DISP |
Displaying Time
1 Press the DISP 
button repeatedly until the clock time is displayed.
Each press changes the modes as follows:
Radio mode
Radio frequency ↔ Clockmode priority
CD Player and Changer modes
→ | Track No. | → | Playing time | → | Clock priority |
| |
|
| mode |
| mode |
| mode |
|
|
|
|
|
|
|
|
|
NOTE
Selecting any tuner or CD function while in the clock priority mode will interrupt the time display momentarily. The function selected will be displayed for about 5 seconds before the time returns to the display.
Setting Time
1
2
3
4 Turn the Rotary encoder to adjust the minutes while the time indication is blinking. The time is automatically set 5 seconds after the minute adjustment. The time can also be manually set by pressing the Rotary encoder.
Setting the Bass Control
You can change the Bass Frequency emphasis to create your own tonal preference.
1 Press the CENTER f button to select the Bass setting mode.
Each press changes the modes as follows:
→Bassmodesetting → Treblemode setting → Normalmode
60Hz ↔ 80Hz ↔ 100Hz ↔ 200Hz
Emphasizes the displayed Bass frequency ranges.
→WIDE1 → WIDE2→ WIDE3 → WIDE4 (Narrow)←........................→(Wide)
Changes the displayed frequency's band width to narrow or wide.
Turn the Rotary encoder to select the desired Bass Level
You can emphasize or weaken the bass frequency.
NOTES
•If no buttons are pressed within 15 seconds, the Bass control setting will be turned off automatically.
•The settings of the Bass Level will be individually memorized for each source (FM, AM and CD) until the
setting is changed. The Bass frequency and Bass Band Width settings adjusted for one source are effective for all other sources (FM, AM and CD).
*Selecting any of the "Setting the Bass Types" (TYPE 1 through 3), temporarily replaces the custom settings you have made above.