Alpine DVA-5205E owner manual Adjusting the volume, Switching between Ntsc and PAL configuration

Page 11

Switching between NTSC and PAL configuration Adjusting the volume

Switching between NTSC and PAL configuration

Switch the video output configuration to NTSC or PAL according to the type of television and the disc recording method.

Press “NTSC/PAL” for at least 5 seconds.

POWER

NTSC/PAL

Adjusting the volume

Adjust the volume for connecting only with the Digital Audio Processor (PXA- H510).

Move the rotary encoder to the right or left.

Turn to the right to increase the volume. Turn to the left to decrease the volume.

DN	V	OL
OL		OL	UP
V			UP

Notes:

•PAL is the standard and there is no need to change the setting. The system is set to PAL at time of shipment from the factory.

•The image output configuration must be correct. Otherwise the following message appears and playback does not start: “VIDEO SIGNAL SYSTEM IS NOT CORRECT”.

	DVD	Video CD
	• Using the Number Keys.	CD
Tips	This describes use of the Number
Tips	Keys, particularly the “+10” key.

To input 10: Press the “+10” key once and then press the “0” key.

To input 16: Press the “+10” key once and then press the “6” key.

To input 23: Press the “+10” key twice and then press the “3” key.

*Each time the “+10” key is pressed, the number increases by 10.

Note:If an Ai-NET product (head unit) has been connected in addition to the Digital Audio Processor (PXA-H510), or if this equipment is connected singly to a TV monitor, adjust the volume on the connected equipment.

11

Image 11

Contents DVA-5205E Precautions Precautions Temperature Contents DVDs About DVDsAbout DVDs CD-ROMsDiscs playable on this DVD player Discs playable on this DVD player Replacing the batteries When using remote control When using remote control Unloading discs Loading and unloading discsLoading and unloading discs Loading discsTurning the power on and off Turning the power on and offMove the rotary encoder to the right or left Adjusting the volumeSwitching between Ntsc and PAL configuration Press NTSC/PAL for at least 5 secondsIf a menu screen appears Playing discsPlaying discs PressStopping playback StoppingPlayback Press to return to normal playback Fast-forwarding/ DVD Video CD Fast-reversingDuring playback Press c or fSlow motion Frames pausingFrame-by-frame Playing stillSearching by title number Searching by titleNumber Playback starts from Selected title number When chapter number 12 is inputSearching directly by chapter or track number Press ENTSearching by elapsed time Start playback using Number keys 0 toSearching by Elapsed timeTitle repeat playback Chapter/track/ DVD Video CDDuring playback, press Angle for at least Seconds Switching the angle DVDSwitching Subtitles subtitle LanguageDisplaying the subtitles Displaying the disc status DisplayingSubtitles Disc statusDisplaying the disc status Video output ON/OFF Only when CVA-1005E/IVA-C800E is connectedVideo output ON/OFF SET for at least Changing the default settings setupChanging the language settings Stop mode, pressPress SET for at least 2 seconds Changing the language settingsSetup screen for the selected language is displayed Use the Joystick to make the selection, then press ENT Changing the TV screen settingsChanging the TV screen settings Use keys 0 to 9 to input Digit country code, then press ENT Changing the country code settingChanging the country code setting Press ENT to reset the country codeUse keys 0 to 9 to input the 4- digit password Setting the rating level parental lockSetting the rating level parental lock Use the Joystick to select the rating level, then press ENT Select Down Sampling under Changing the down sampling settingChanging the down sampling setting SET UP onPress SET for at least 2 seconds Selection, then press ENT Changing the digital output settingChanging the digital output setting Audio output/Optical digital audio output Set up are stored and the set up mode is canceledChanging the LED Indicator settingChanging the LED indicator setting Displays the closed captions Custom setting Changing the Closed Caption Setting SET UPCustom setting Changing the Closed Caption setting Press SET for atUse the Joystick to select DVD or CD, then press ENT Custom setting Changing the Ai-NET settingsCustom setting Changing the Ai-NET settings Use the Joystick to select Ai- NET SETUP, then press ENTDVD Custom setting Changing the Ai-NET settings SET UPSelect Custom Setup under Custom setting Changing the H.U. Control settingsCustom setting Changing the H.U Control settings Custom setting Changing the H.U. Control settings SET UP Press A.PROC OperatingDigital audio Processor optional Operating the digital audio processor optionalAdjusting the parametric equalizer Adjusting the parametric equalizerPress ENT. The level LV value turns Adjusting the surround settingsAdjusting the surround settings Use the Joystick to adjust the level LV, then press ENTStoring Surround settingsStoring the surround settings Use the Joystick to adjust the time, then press ENTRecalling Recalling the surround settingsAdjusting the time compensation Using the Pro Logic mode AdjustingUsing the Pro Logic modeUse the Joystick to switch the mode Setting Speaker modeAdjust Setting the speaker mode Use the Joystick to select the level item, then press ENT Adjusting Acoustic imageAdjust Adjusting the acoustic image Use the Joystick to Select Rear MIX, then press ENT Adjust Mixing the rear audio channelsMixing the rear Audio channels Time compensation Adjust Center speaker time compensationCenter speaker Rear speaker time compensation Adjust Rear speaker time compensationUse the Joystick to select Rear DELAY, then press ENT Use the Joystick to select LISTENING, then press ENT Adjust Achieving powerful sound at low volumesAchieving powerful Sound at low volumes Use the Joystick to select ON, then press ENT Adjusting Speaker levelAdjust Adjusting the speaker level Use the Joystick to select Test TONE, then press ENTUse the Joystick to select the speaker, then press ENT Mode Adjusting the volume, fader and balanceAdjusting the volume, CD fader and balance Mode Adjusting the subwoofer Adjusting SubwooferOn The response is flat OFF Off Mode Turning the defeat function on and offTurning the defeat function on and off To set the pause mode, press Press Source and select CD DVA-5205E modeOperating from the head unit Operating from the head unitDisplay pattern changes each time the button is pressed Switch OperationPress Title on the head unit Remote Control RUE-4185 RUE-4160 Unit Operation Operating from the head unit’s remote control unitOperating from the head unit’s remote control unit Selected Press Source , Audio SEL or A. SELto set the CD DVA-5205EMode To set the pause mode, press Or ENTSpeaker layout for enjoying Dolby Digital sound/dts sound TerminologyTerminology For details, see List of language codesList of language codes List of language codes List of country codes List of country codesList of country codes List of country codes Case of difficulty Symptom Cause RemedyNTSC/PAL SpecificationsOperating the DVA-5205E DVD Video Player Functions of remote control unit buttonsGO to Button → P16, 17 Power Button → P10DVD/AUDIO Switch → P8 RPT Button → P19Operating audio for the Alpine Ai-NET Memo Alpine Electronics of CANADA, INC 13-38, Hinodai Hino, Tokyo, Japan