Alpine DVA-5205E owner manual Playing discs, Press, If a menu screen appears, Playback starts

Page 12

Playing discs

ENT

DISP	LIST
MENU	GO
	TO
SET	TITLE
SOURCE
SLOW

CHG

0 ～�9 、�+10UP

	Playing discs		DVD Video CD

			CD

Caution		• With some DVDs, certain operations
		are disabled. Such operations are

not possible on such DVDs.

•The DVD functions described in this manual are not supported by all DVDs. See the individual DVDs instructions for details on the features supported.

•Fingerprints on a disc may adversely affect playback. If a problem occurs, remove the disc and check for fingerprints on the playback side. Clean the disc if necessary.

•When using the remote control, be careful to press one button at time. Pressing multiple buttons at the same time may cause erroneous operation.

•Even if you switch the power or the Ignition Key to OFF during playback or change the video source, playback will continue from the point where it stopped when the power is turned ON again.

If the disc is removed or the Reset switch is pressed, the play position memory is released.

•Operation may not be accepted depending on the type of disc and the playback conditions. At such a time the following mark is displayed on the screen:

	Press “ ”.	SOURCE
	Playback starts.
		SLOW

DVD Video CD

• If a menu screen appears

On DVDs and video CDs with playback control (PBC), menu screens may appear automati- cally. If this happens, perform the operation described below to start playback.

Note: For many discs, the menu screen can also be displayed by pressing “MENU” or “TITLE” (for at least 2 seconds).

12

Image 12

Contents DVA-5205E Precautions Precautions Temperature Contents About DVDs About DVDsCD-ROMs DVDsDiscs playable on this DVD player Discs playable on this DVD playerWhen using remote control When using remote controlReplacing the batteries Loading and unloading discs Loading and unloading discsLoading discs Unloading discsTurning the power on and off Turning the power on and offAdjusting the volume Switching between Ntsc and PAL configurationPress NTSC/PAL for at least 5 seconds Move the rotary encoder to the right or leftPlaying discs Playing discsPress If a menu screen appearsStopping PlaybackStopping playback Fast-forwarding/ DVD Video CD Fast-reversing During playbackPress c or f Press to return to normal playbackFrames pausing Frame-by-framePlaying still Slow motionSearching by title NumberSearching by title number When chapter number 12 is input Searching directly by chapter or track numberPress ENT Playback starts from Selected title numberStart playback using Number keys 0 to Searching byElapsed time Searching by elapsed timeChapter/track/ DVD Video CD Title repeat playbackSwitching the angle DVD SwitchingSubtitles subtitle Language During playback, press Angle for at least SecondsDisplaying SubtitlesDisc status Displaying the subtitles Displaying the disc statusDisplaying the disc status Only when CVA-1005E/IVA-C800E is connected Video output ON/OFFVideo output ON/OFF Changing the default settings setup Changing the language settingsStop mode, press SET for at leastChanging the language settings Setup screen for the selected language is displayedPress SET for at least 2 seconds Changing the TV screen settings Changing the TV screen settingsUse the Joystick to make the selection, then press ENT Changing the country code setting Changing the country code settingPress ENT to reset the country code Use keys 0 to 9 to input Digit country code, then press ENTSetting the rating level parental lock Setting the rating level parental lockUse keys 0 to 9 to input the 4- digit password Use the Joystick to select the rating level, then press ENT Changing the down sampling setting Changing the down sampling settingSET UP on Select Down Sampling underPress SET for at least 2 seconds Changing the digital output setting Changing the digital output settingSelection, then press ENT Set up are stored and the set up mode is canceled Audio output/Optical digital audio outputIndicator setting Changing the LED indicator settingChanging the LED Custom setting Changing the Closed Caption Setting SET UP Custom setting Changing the Closed Caption settingPress SET for at Displays the closed captionsCustom setting Changing the Ai-NET settings Custom setting Changing the Ai-NET settingsUse the Joystick to select Ai- NET SETUP, then press ENT Use the Joystick to select DVD or CD, then press ENTCustom setting Changing the Ai-NET settings SET UP DVDCustom setting Changing the H.U. Control settings Custom setting Changing the H.U Control settingsSelect Custom Setup under Custom setting Changing the H.U. Control settings SET UP Operating Digital audio Processor optionalOperating the digital audio processor optional Press A.PROCAdjusting the parametric equalizer Adjusting the parametric equalizerAdjusting the surround settings Adjusting the surround settingsUse the Joystick to adjust the level LV, then press ENT Press ENT. The level LV value turnsSurround settings Storing the surround settingsUse the Joystick to adjust the time, then press ENT StoringRecalling the surround settings RecallingAdjusting Using the ProLogic mode Adjusting the time compensation Using the Pro Logic modeSetting Speaker mode Adjust Setting the speaker modeUse the Joystick to switch the mode Adjusting Acoustic image Adjust Adjusting the acoustic imageUse the Joystick to select the level item, then press ENT Adjust Mixing the rear audio channels Mixing the rear Audio channelsUse the Joystick to Select Rear MIX, then press ENT Adjust Center speaker time compensation Center speakerTime compensation Adjust Rear speaker time compensation Use the Joystick to select Rear DELAY, then press ENTRear speaker time compensation Adjust Achieving powerful sound at low volumes Achieving powerful Sound at low volumesUse the Joystick to select LISTENING, then press ENT Adjusting Speaker level Adjust Adjusting the speaker levelUse the Joystick to select Test TONE, then press ENT Use the Joystick to select ON, then press ENTMode Adjusting the volume, fader and balance Adjusting the volume, CD fader and balanceUse the Joystick to select the speaker, then press ENT Adjusting Subwoofer Mode Adjusting the subwooferMode Turning the defeat function on and off Turning the defeat function on and offOn The response is flat OFF Off Press Source and select CD DVA-5205E mode Operating from the head unitOperating from the head unit To set the pause mode, pressSwitch Operation Press Title on the head unitDisplay pattern changes each time the button is pressed Operating from the head unit’s remote control unit Operating from the head unit’s remote control unitRemote Control RUE-4185 RUE-4160 Unit Operation Press Source , Audio SEL or A. SELto set the CD DVA-5205E ModeTo set the pause mode, press Or ENT SelectedTerminology TerminologySpeaker layout for enjoying Dolby Digital sound/dts sound List of language codes List of language codesFor details, see List of language codes List of country codes List of country codesList of country codes List of country codes Symptom Cause Remedy Case of difficultySpecifications NTSC/PALFunctions of remote control unit buttons Operating the DVA-5205E DVD Video PlayerPower Button → P10 DVD/AUDIO Switch → P8RPT Button → P19 GO to Button → P16, 17Operating audio for the Alpine Ai-NET Memo 13-38, Hinodai Hino, Tokyo, Japan Alpine Electronics of CANADA, INC