Alpine DVA-5205E owner manual Loading and unloading discs, Loading discs, Unloading discs

Loading and unloading discs

Loading and unloading discs

DVD Video CD

CD

Turn on the power before loading and unloading discs. (Refer to page 10 “Turning the power on and off”.)

Loading discs

Press the door in gently then slide it downwards.

Close the door.

Be sure to close the door to prevent dust from getting inside.

POWER

POWER

OPEN

Insert the disc with the side containing words or diagrams facing upwards.

Once the disc is partially inserted, it is drawn in automatically. Playback starts.

DVD

Unloading discs

Press the door in gently then slide it downwards. The disc is automatically ejected part way.

If the disc is not removed, it is automati- cally drawn back into the player after a while.

Notes:

•If the ignition key is on ACC or ON, a disc can be inserted even when the power is OFF. The power then goes ON automatically.

•For two-sided DVDs, play one side of the disc to the end, then unload the disc, turn it over and reload it to play the other side.

Refer to the indications on the disc (“Side 1”/”Side 2”).

•Never insert map discs for navigation purposes as they could damage the equipment.

•If wrong disc, upside-down discs or dirty discs have been inserted, “DISC ERROR” is displayed. Open the door and remove the disc.

POWER

Notes:

•If the ignition key is on ACC or ON, a disc can be removed even when the power is OFF. After removing the disc, the power goes OFF again automatically.

•Even if you open the door, the disc will not be ejected in the ACC OFF mode or in the disc loading mode (“LOADING” is displayed).

Caution	Never close the door while the disc
	is being unloaded. Doing so could
	scratch the disc or damage the
	player.

9