Audiovox ACD-32A manual Universal Installation Andimportcar Installation

Page 4

UNIVERSAL INSTALLATION ANDIMPORTCAR INSTALLATION

UNIVERSALINSTALLATIONANDIMPORTCARINSTALLATION

This installation is designed for cars, trucks, vans, and boats that have an existing radio opening that is no larger than the size shown on the template provided (182mm wide x 53mm high). If the opening is smaller than required, you can use a file to enlarge it to match the template, using the slots on the template as a guide. If you have no existing radio opening, use the template to accurately cut the required size as per the slots on the template.

CAUTION: 1. DO NOT CUT OR FILE THE OPENING TO THE OUTER EDGES OF THE TEMPLATE!

2.FOR PROPER OPERATION OF THE CD PLAYER, THE CHASSIS MUST BE WITHIN 20° OF HORIZONTAL. MAKE SURE THE UNIT IS MOUNTED WITHIN THIS LIMITATION.

1.InspecttheExistingRadioOpening:

A.Use the radio opening template (supplied) to make sure the dashboard opening is the proper size. If your vehicle does not have an existing opening of this size, it will be necessary to cut or file the opening to these dimensions.

B.Check that there will be sufficient space behind the dashboard for the radio chassis.

2.PreparetheRadioforinstallation:

A.Carefully check the radio chassis for any shipping screws that are labeled "Remove Before Installation" and remove them as necessary.

B.Remove the detachable front panel if it is attached to the chassis, as explained in the Operating Instructions section of this manual.

C.Using the 2 removal tools (supplied), remove the mounting sleeve from the radio chassis as shown in the diagram below.

3.MountingtheRadioSleeve:

A.Check the dashboard opening size by sliding the mounting sleeve into it. If the opening is not large enough, carefully cut or file as necessary until the sleeve easily slides into the opening. Do not force the sleeve into the opening or cause it to bend or bow.

B.Locate the series of bend tabs along the top, bottom, and sides of the mounting sleeve. With the sleeve fully inserted in the dashboard opening, bend as many of the tabs outward as necessary so that the sleeve is firmly secured to the dashboard.

USETEMPLATETOCHECKOPENINGSIZE

ORTOCUTOPENINGINSOLIDHELP!

DASHBOARDS

1-800-645-7102

Monday-Friday 8:30am-7:00pmEastern

Saturday 9:00am-5:00pmEastern

3

RADIO

MOUNTINGSLEEVE

MOUNTINGANGLELIMITATION

 

20°

SIDEVIEW

MAX.

FRONT

OF

PANEL

CHASSIS

 

 

20°

 

MAX.

REMOVALTOOLS

REMOVABLEFRONTPANEL (REFERTOOPERATING INSTRUCTIONSFORREMOVAL)

128-5272

4 of 20

Image 4
Contents ACD-32A Index HowtousethismanualKitlisting KitinformationImportcars Universal Installation Andimportcar Installation UniversalinstallationandimportcarinstallationUniversal Installation and Importcarinstallation CHRYSLER-DODGE-PLYMOUTH Installation CHRYSLER-DODGE-PLYMOUTHINSTALLATIONCHEVROLET-OLDS-BUICK-PONTIAC-GMC FORD-LINCOLN-MERCURY Installation FORD-LINCOLN-MERCURYINSTALLATIONRadiowiring REFERTOPAGE9OR10FORSPEAKERWIRINGSpeakerwiring ForradiowiringWHENUNITISWIREDTOEITHERA2OR4 REFERTOPAGE8White Blue Violet Lightgreen Rcapatchcable Operating Instructions LEFT/RIGHT Balance Control Loudness ContourAudio Mute AM/FM Band SelectorBqAUTO-STORETUNINGAS PRE-SET Scan Tuning PS Operating Instructions Settingtheclock ErrorcodesDetaching the Front Panel Attaching the Front PanelSpecifications FrequencystepswitchTroubleshooting TroubleshootingProblem Probable Cause Check Following Care and Maintenance CareandmaintenanceMonth Limited Warranty