FORD-LINCOLN-MERCURY INSTALLATION
FORD-LINCOLN-MERCURYINSTALLATION
AllU.S.MadeCars,Trucks,andVansBuiltSince1985
CAUTION: 1. DO NOT CUT OR FILE THE OPENING TO THE OUTER EDGES OF THE TEMPLATE!
2.FOR PROPER OPERATION OF THE CD PLAYER, THE CHASSIS MUST BE WITHIN 20° OF HORIZONTAL. MAKE SURE THE UNIT IS MOUNTED WITHIN THIS LIMITATION.
1.RemoveExistingRadio:
A.Remove existing radio dash trim panel surrounding the radio opening. This panel is usually secured by screws and/or
B.Remove the screws used to secure radio to the
Helpful Hint: If you do not have an existing radio, you will find the radio opening is covered by a disposable cover plate.
C.Pull the radio forward to access the wiring and antenna cables plugged into the rear of the chassis.
D.
2.InstalltheNewRadio:
A.If a kit is not required, follow the instructions on pages 3 and 4. If a kit is required, follow the instructions included with the kit and secure the sleeve from the radio to the mounting plate from the kit as explained on page 3.
B.Install the sleeve/mounting plate assembly to the
C.Replace the dashboard trimpanel.
D.Following the instructions of steps 4 and 5 on page 4, carefully wire the radio and complete installation into the mounting sleeve.
MOUNTINGPLATEFROMKIT
(NOTINCLUDEDWITHRADIO)
Saturday
7
IMPORTANT
AMOUNTINGKITISREQUIRED
FORTHISINSTALLATION
FACTORYDASHPANEL
MOUNTINGSLEEVE
INSTALLRADIOUSINGSAME
PROCEDUREASEXPLAINED
ONPAGES3AND4
RADIO REMOVALTOOLS
DETACHABLE
FRONTPANEL
8 of 20