BUTTON & OPERATION OF AV SYSTEM
AV Head Unit
BUTTON & OPERATION OF AV SYSTEM
Power On/Off
15
If the power button is pressed when ACC is on, the monitor will slide out from the inside of the unit and
If the power button is pressed again when power is on, the monitor will slide into the unit.
When ignition key is removed while the unit is on, the unit will remember the mode at that time, and recall it back when the ACC is turned on.
CONTROL
MENU
MODE
MENU
POWER
PWR
CONTROL
NAVI
Changing Mode’s
8 | 9 | 10 | 11 | 12 | 13 | 14 |
1 | 2 | 3 | 4 | 5 | 6 | 7 |
When the mode button is pressed, the mode changes in the following order.
AUX1 
AUX2 
AUX3 
CONTROL
MODE
MENU
MODE
MENU
PWR CONTROL
NAVI
1 | Power | 7 | Reset | 13 | Menu display |
2 | VIDEO | 8 | Mode | 14 | Navigation |
3 | Close | 9 | MENU | 15 | 7” TFT LCD display |
4 | Remote sensor | 10 | MENU |
|
|
5 | Open | 11 | CTRL |
|
|
6 | Wide mode | 12 | CTRL |
|
|
BRIGHT/DIMMER/COLOR/TINT
When the VIDEO button is pressed, the unit switches into video control mode.
To select the video mode to be adjusted, press the Menu 
/
button.
Pressing the Menu 
button, switches the video control mode as follows;
BRIGHT 
DIMMER 
COLOR 
TINT 
BRIGHT 
Pressing the Menu 
button, switches the video control mode as follows;
BRIGHT 
TINT 
COLOR 
DIMMER 
BRIGHT 
