Installation Instructions

TOLL-FREE INSTALLATION ASSISTANCE

The installation and wiring connections for this unit are so simple, we doubt you'll need our help, but, if you do, we're here to help you. Just call our toll-free telephone assistance line at 1-800-645-4994 during the days and hours shown (U.S.A. and Canada only).

		TIME ZONES
DAY	PACIFIC	MOUNTAIN	CENTRAL	EASTERN
MON - FRI	5:30AM - 4PM	6:30AM - 5PM	7:30AM - 6PM	8:30AM - 7PM
MON - FRI	5:30AM - 4PM	6:30AM - 5PM	7:30AM - 6PM	8:30AM - 7PM
SATURDAY	6AM - 2PM	7AM - 3PM	8AM - 4PM	9AM - 5PM

UNIVERSAL INSTALLATION USING MOUNTING SLEEVE

NUT

PERFORATED STRAP

FASTEN THIS END TO SCREW

EXISTING DASH OPENING

FILE EDGES TO FIT IF NECESSARY - DO NOT OVERFILE

NOTE: IF DASH IS SOLID, USE REAR SIDE (WITHOUT THE LIP) OF

STUD ON REAR OF CHASSIS

SCREW

NUT

MOUNTING SLEEVE

MOUNTING SLEEVE AS A TEMPLATE & CUT OPENING

UNIT

SCREW STUD

BEND TOP TABS UPWARD

BEND BOTTOM TABS DOWNWARD

FASTEN THIS END TO SECURE PART OF DASHBOARD.	FRONT PANEL
DRILL HOLE IF NECESSARY.

ISO INSTALLATION

REMOVE THE PLASTIC FRAME FROM THE FRONT OF THE CHASSIS BY CAREFULLY UN-SNAPPING IT.

UN-SNAP AT 2 PLACES

EACH ON TOP AND BOTTOM

PLASTIC FRAME

TYPICAL INSTALLATION

FACTORY MOUNTING BRACKETS

-12-

-13-