Remote Control Part Number 136B2621, Change Mode

ADDITIONAL FEATURE AND OPERATION

Used to store milage reminders for engine service

Press + hold the “DISP” button for more than 1second the display will switch into DIARY mode.

Press the “MENU” to select input mode.

Using the “CTRL ”, input the number on the top right display.

Press the “CTRL” button to decrease the input number by 100.

(Keep pressing “CTRL” button to decrease rapidly by 1,000)

Press the “CTRL” button to increase the input number by 100.

(Keep pressing the “CTRL” button to increase rapidly by 1,000)

The maximum number of input is 999,999.

If there is no button pressed within 5 sec or the DISP button is pressed, the mode will switch back to the previous mode.

NOTE “Diary” is the convenient feature so that user can make memo of the milage required to change TRANSMISSION OIL, ENGINE OIL, BRAKE PAD, ANTI-FREEZER, BELT, TIRE.

REMOTE CONTROL PART NUMBER 136B2621

Power On/Off

Press “PWR” button to turn the unit On/Off (same as Power	POWER
button on main unit).	MENU

		PWR
CONTROL	MODE	CONTROL
	MENU
		NAVI

Change Mode

Press the mode button to switch from AUX1, AUX2, or AUX3 (Same as Mode button on main unit.)

Using with Navigation System(OPTION)

Connect with Navigation system and press “Navi” button.

Close the Monitor When the Power is On

When the monitor is opened(Power On condition), press “,” button on Remote Controller to close the monitor.

When the monitor is closed(Power On condition), keep pressing button or “,” button on Remote Controller longer than 2 sec to bend backward about 75 .

Press “,” button to bend the monitor backward by one step.

After adjusting monitor angle, press “,” button longer than 2 sec to memorize the current monitor angle.

Once monitor angle is memorized, monitor will open to the memorized angle.

-10-

-11-