Tektronix PHASER 380 manual Installing printer software for Windows NT

2Getting Set Up

Installing printer software for Windows NT 4.0

If you are installing software from ßoppy diskettes, you may need more than one diskette depending on your Windows system. Keep all printer diskettes handy during the installation, and insert each diskette when you are prompted by the installation program.

Note If you are going to be using a printer on a network, refer to your Windows NT manual for instructions on installing network software (either Services for Macintosh (AppleTalk) or TCP/IP print services (for TCP/IP; lpr print services).

1.Insert either the printerÕs CD-ROM or the Phaser 380 Color Printer Installer for Windows Disk 1 into the appropriate drive on your computer.

2.Click the Start icon in the taskbar, and select Run.

3.Type in the drive for the CD-ROM or diskette, type SETUP, and click OK.

4.Click Next in the two introduction screens in the Installer.

5.In the Select Installation Type dialog box, select either Easy Installation or Custom Installation, and click Next.

2-34Phaser 380 Color Printer