Tektronix PHASER 380 manual Locking the transit restraint

Caring for Your Printer 5

Locking the transit restraint

Refer to the following illustration while performing these steps.

1.When the printer displays the Ready message or the printerÕs name, power it down using the rear-panel On/Off switch. The printer places the printhead in the locking position.

Caution To avoid damaging the printerÕs internal components, always turn the printer power off and lock the transit restraint before moving the printer. Failure to do so may result in damage to the printerÕs internal components and may invalidate your printerÕs warranty.

2.Locate the transit restraint on the right side of the printer and insert a coin into the transit restraint slot.

3

2

9662-49

3.While pressing inward with medium pressure, turn the transit restraint slot in a clockwise direction to lock the printhead in position. The lock button is recessed from the side of the printer when fully engaged.

User Manual 5-55