Tektronix PHASER 380 manual Previewing with Check Print, Tektronix driver for Windows

Printing: Beyond the Basics 4

Previewing with Check Print

This feature is available only with the printerÕs Extended Features option. When sending a multiple-page Þle to the printer through the driver, you can select Check Print to preview the Þrst page of the job and determine if the job is printing as expected before proceeding with the remainder of the job. This is especially useful when printing a large job.

The ability to access Check Print from the driver is enabled and disabled in the printerÕs front panel. You can also set the timeout in the front panel (the timeout is the amount of time the printer will wait after sending the Þrst page of a Þle, before it continues with the remainder of the job).

By default, access to Check Print is enabled, with a default timeout of

5 minutes. Refer to ÒFront panel menu mapÓ on page 7-5 for information on navigating the front panel menus.

Use the following instructions to select the Check Print option in the printer driver:

1.Select Check Print in a supported driver:

Windows 95 PostScript driver	Select Check Print in the Printer features
(AdobePS 4 or Microsoft):	field in the Device Options tab.
Tektronix driver for Windows 3.1:	Select Check Print options in the Tektronix
	Printer Features dialog box, available by
	clicking the Printer Features button in the
	Options dialog box.
Adobe PS3 driver for Windows 3.1:	Select Check Print in the Features tab.
LaserWriter 8.3.4 driver:	Select Check Print in the Print Options dialog
	box, available by clicking the Options button in
	the Print dialog box.
Phaser 380 driver:	Select Check Print in the TekColor Options
	dialog box, available by clicking the TekColor
	button in the Print dialog box.
Phaser 380 GX driver:	Select Check Print in the TekColor printing
	extension in the Print dialog box (or in the
	Printer Driver Defaults dialog box available
	from the Printing menu).

User Manual 4-15