Tektronix PHASER 380 manual Specifications, Fast Color Standard Enhanced Mode

9Regulatory Information and Specifications

Specifications

Printer tilt

Place the printer on a level surface with no more than 2¡ tilt in any direction. Equivalent to raising one corner of the printer approximately 16 mm (0.625 in.).

Caution Tilting the printer more than 2¡ causes drum ßuid to leak from the maintenance tray resulting in damage to your printer not covered by the printerÕs warranty.

Temperature

Operating: 15¡ C to 35¡ C (59¡ F to 95¡ F)

Nonoperating: Ð30¡ C to +60¡ C (Ð22¡ F to 140¡ F)

Storage: Ð30¡ C to +60¡ C (Ð22¡ F to 140¡ F)

Humidity

Operating: 10% to 80% Relative Humidity, noncondensing

Nonoperating: 10% to 95% Relative Humidity, noncondensing

Altitude
Operating:		0 to 2,400 meters (0 to 8,000 feet)
Nonoperating:		0 to 15,000 meters (0 to 50,000 feet)
Primary voltage ranges
87 Ð 128 VAC, 115 VAC nominal				174 Ð 250 VAC, 220 VAC nominal
Frequency range
48 to 66 Hz
AC input ratings
115 VAC, 12 Amps			220 VAC, 6 Amps
Print quality and Pages Per Minute (ppm) speed
			Fast Color	Standard	Enhanced
			mode	mode	mode
	A4/Letter-size paper		3.5 ppm	2.5 ppm	1.2 ppm
	A4/Letter-size transparency		Not	1.5 ppm	0.64 ppm
			supported
	A3/Tabloid Maximum-size paperΔ		2.0 ppm	1.3 ppm	0.6 ppm

Left and right margins for Letter-size media set to 7.3 mm (0.29 in.) or larger.

ΔTabloid Maximum transparency supported only from the manual-feed slot.

9-8 Phaser 380 Color Printer