Tektronix PHASER 380 manual Installing the optional Lower Paper Tray Assembly

2Getting Set Up

Installing the optional Lower Paper Tray Assembly

A Lower Paper Tray Assembly for paper printing is available as an option.

Use Tektronix order number Z380LTA.

Caution To avoid damage, let the printer cool down for at least 45 minutes before you begin installing a Lower Paper Tray Assembly. This provides sufÞcient time for the melted ink to solidify.

The Lower Paper Tray Assembly uses a universal tray with a capacity of 250 sheets of paper. The lower tray does not support printing of transparencies. The Transparency/Paper switch on the side of the media tray is ignored when the universal tray is installed in the Lower Paper Tray Assembly.

Warning The printer is not permanently attached to the Lower Paper Tray Assembly. When moving the printer, Þrst disconnect it from the Lower Paper Tray Assembly and then move each unit separately. Moving the printer incorrectly may cause damage or personal injury.

The printer weighs about 100 kg (220 lbs.). Do not attempt to lift the printer without the assistance of others. Always use the four pull-out handles located under each corner of the printer when moving it.

2-8 Phaser 380 Color Printer