Tektronix PHASER 380 manual 9662-64

3Printing Basics

Changing media sizes. The media tray uses two adjustable, blue-colored guides to hold paper and transparency media in position. Each guide has two tabs that operate independently. To adjust a guide, press both tabs at the same time and slide the guide in or out to position it against the media.

1.Tab number 1 controls the stop position of the guide at seven Þxed media sizes: Executive, A4, Letter, Legal, Tabloid, A3 and Tabloid Maximum.

2.Tab number 2 controls the stop position of the guide in small increments for all other (custom) media sizes.

2

1

1

2

9662-64

Note If tab number 1 in the rear of the tray is not locked in one of seven Þxed-media positions, the printer sees the media as a custom size and must measure the media during the Þrst print job to determine the actual media size. Image clipping can occur when the printer encounters ÒunknownÓ media sizes.

3-36Phaser 380 Color Printer