Operational hints contd | Tektronix PHASER 380 specs

Operational hints (cont'd.)

Hint/Symptom	Solution

Ink Low message	Apply pressure to each row of ink sticks in the loading bin
appears when ink bins	to make sure they are not jammed.
are full.

Delayed printout.	See “Printer standby modes” on page 7-8.

Printer outputs two prints	Printer is clearing print drum and reprinting image. Refer
after a jam is cleared.	to “All about media jams” on page 6-17.

Turn off the Startup	Refer to “Startup Page” on page 7-6.
Page.

Maintenance tray is	The printer locks the maintenance tray until it has cooled
locked inside printer.	down. Wait for a few minutes and try removing it again.