Tektronix PHASER 380 manual If you selected the AdobePS 3 Driver for Windows 3.1

Getting Set Up 2

Tektronix Driver for Windows 3.1:		AdobePS 3 Driver for Windows 3.1:
Setup instructions		Setup instructions
If you selected Easy Installation, or if you selected		If you selected the AdobePS 3 Driver for Windows 3.1 in
the Tektronix Driver for Windows 3.1 in the Custom		the Custom Installation, continue with the following
Installation, continue with the following instructions:		instructions:
1.	Open the Windows Control Panel.	1. In the Adobe installer, click Read or Skip in the
2.	Open the Printers dialog box.	README.WRI dialog box to start the installation.
		2. Click Continue in the PostScript Printer Driver Setup
3.	Under Installed Printers, select your Phaser 380
		dialog box. Files are copied to your computer.
	printer, click Connect:

■Phaser 380 (TekColor) Ext (Extended Features option)

■Phaser 380 (TekColor) (standard printer configuration)

4.Select the printer’s port, click OK.

3.Click the Restart Windows button in the dialog box that appears.

4.After Windows restarts, the Install PostScript Printer from PPD dialog box opens. Select your printer in the list and click Install:

■Tektronix Phaser 380 Extended (Extended Features option)

■Tektronix Phaser 380 (standard printer configuration)

5.Click OK in the next dialog box.

6.Click Close in the Install PostScript Printer from PPD dialog box.

7.Click OK in the information dialog box.

8.In the Control Panel, double-click Printers.

9.In the Printers dialog box, select the printer you just installed, and click Connect.

10.In the Connect dialog box, select the port the printer is connected to, and click OK.

User Manual 2-45