Tektronix PHASER 380 manual Color corrections, Color correction mode Description

Printing Basics 3

Color corrections

The printer provides TekColor Dynamic Correction software, which consists of the following color correction modes. Refer to ÒColor correction descriptionsÓ on page 4-6 for more information.

Color correction mode	Description
None	No correction made to colors. Used with the 600 x 300 (Enhanced) print quality
	mode for PANTONE Color matching.
Vivid Color	Default setting. Produces the brightest possible colors.
Display	Adjusts color to closely approximate the colors on a standard display screen.
SWOP Press	Specification for Web Offset Publications. Typically used to match U.S. press
	standards.
SNAP Press	Specifications for Non-Heat Advertising Printing. Use this option with newsprint
	paper to preview works for a non-heat web offset printing press.
Euroscale Press	Used to match equivalent 3M Matchprint¨ proofs.
Commercial Press	Used to match commercial 3M Matchprint¨ proofs.
Toyo	This option is designed to match Toyo printing inks on coated paper.
DIC	This option is designed to match Dai Nippon printing inks on coated papers.
FujiProof	This option is typically used in the United States. It is designed to match the Fuji
	Color Art System for commercial North American proofs.
Monochrome	Prints a color image as a monochrome gray scale. Outputs color page masters in
	black-and-white for photocopying.
Use Printer Setting	Uses the color correction mode specified in the printer’s front panel setting rather
	than any printer driver setting.
	Vivid Color, the default color correction mode, is generally recommended.
	You can view an approximate sample output of some color corrections at the
	bottom of the printerÕs Startup Page. Refer to ÒStartup PageÓ on page 7-6 for
	more information.
	Note	If your printer is networked and you have changed the front panel
		settings, make sure that you tell other users on the network. Printer
		settings affect all prints made with non-supported drivers.

User Manual 3-27