9Regulatory Information and Specifications
MSDS for ColorStix ink sticks
Section I – Product identification
Trade name and Tektronix part number: |
|
ColorStix® Solid Ink — Black | |
ColorStix® Solid Ink — Cyan | |
ColorStix® Solid Ink — Magenta | |
ColorStix® Solid Ink — Yellow |
Section II – Information on ingredients
Ingredients:
Fatty amide waxes, Rosin ester, Phthalate ester, Black, cyan, magenta, or yellow dye
Section III – Hazards identification
Potential Health Effects:
Eyes: Contact unlikely. If any particles get into the eye, flush thoroughly with water.
Skin: Not an irritant based on test results.
Inhalation: Not an expected route of exposure.
Ingestion: Not an expected route of exposure. See section XI.
Section IV – First aid measures
None indicated. This product is a waxy solid and should not cause health hazards when used as intended.
Section V – Fire fighting measures
Flammable Properties:
Flash point: Above 93.3° C (200° F) NFPA class 3B.
Fire & explosion hazards: These inks will burn. No unusual hazards are expected.
Section VI – Accidental release measures
Spill Or Leak: Not applicable.
Section VII – Handling and storage
Handling: None.
Storage: Avoid high temperatures.
Section VIII – Exposure control – personal protection
Exposure Guidelines: No special protection indicated when used as intended. TLV/PEL: None established.
Section IX – Physical and chemical properties
Appearance: Waxy, solid. Black, blue, red or yellow in color.
Odor: None.
Solubility: Not water soluble.
Section X – Stability and reactivity
Stability: Stable.
Incompatibility With Other Materials: None.
Hazardous Polymerization: Will not occur.
Phaser 380 Color Printer |
