Tektronix PHASER 380 manual As the printer warms up, Front panel controls, Turning off the Startup

Getting Set Up 2

As the printer warms up

The Þrst time you turn your printer on, it will take about 20 minutes to warm up. The printerÕs front panel displays a percentage value to indicate its progress. The warm-up cycle is complete when the front panel displays

100%.

As the printer initializes, you will hear a series of start-up noises that are normal and are not an indication of problems with the printer. During warm-up, the printer outputs a cleaning page as part of its initialization. The printer is available for printing when it displays Ready or the printerÕs name.

Turning off the Startup Page

After the printer has warmed up, it automatically prints a Startup Page. If you want to turn off the Startup Page, you can do so through the front panel. Refer to ÒFront panel overviewÓ on page 7-1 for instructions on using the front panel. You can also control the Startup Page through a utility Þle provided on the printerÕs CD-ROM, or through your World Wide Web browser. Refer to the CD-ROM or the PhaserShare Network Cards and Software System Administrator Manual, respectively, for information on utility Þles and web browsers.

Front panel controls

When you Þrst turn on the printer, the Power and Error indicators on the front panel are lighted. The printer takes about 20 minutes to completely warm up. During the warm-up cycle, the Error indicator goes out, the Power indicator ßashes, and the front panel displays a series of ÒWarming upÓ messages.

User Manual 2-27