Tektronix PHASER 380 manual PhaserShare card port optional

Getting Set Up 2

1.PhaserShare card port (optional)

The printer accepts one of the following:

■PhaserShare Ethernet card supporting TCP/IP, Novell NetWare, EtherTalk, Telnet and FTP protocols.

■PhaserShare Token Ring card supporting TCP/IP, Novell NetWare, TokenTalk, Telnet and FTP protocols.

■PhaserShare LocalTalk/Serial card.

The PhaserShare Network Cards and Software System Administrator Manual contains all the information necessary for conÞguring and using the optional network interfaces. Refer to ÒPhaserShare network cards (recommended)Ó on page 8-7 for ordering information.

2.Parallel port (standard)

The parallel port is a standard IEEE 1284 high-density port. The adapter that is included with the printer may be used with low-density parallel cables if an appropriate high-density cable is not available.

3.SCSI port (standard)

The SCSI port is used only for connecting an external SCSI hard disk or for connecting the Phaser Copystation. Refer to ÒSCSI peripheral devicesÓ on page 2-24 for more information on the SCSI port. Refer to ÒPhaser CopystationÓ on page 8-8 for more information on the Phaser Copystation.

User Manual 2-21