Tektronix PHASER 380 manual Moving your printer, Waiting 45 minutes before moving

Caring for Your Printer 5

Moving your printer

Before moving the printer, follow these three important steps as described later in detail.

1.Turn off the printer and wait for at least 45 minutes.

2.Remove the maintenance tray (B).

3.Lock the transit restraint.

Waiting 45 minutes before moving

Caution To avoid damaging the printer, let the printer cool down for at least 45 minutes before you move it so that the ink has time to solidify. Failure to wait 45 minutes will likely result in an ink spill that will damage the printerÕs internal components.

Before you move the printer, wait for the printer to display the Ready message or the printerÕs network name, then turn off the printer using the rear-panel On/Off switch.

Warning The printer weighs about 100 kg (220 lbs.). Do not attempt to lift the printer without the assistance of others. Always use the four pull-out handles located under each corner of the printer when moving it.

User Manual 5-53