Section 2 | Installation |
|
|
2Click the Print icon or choose Print from the File menu to display the Print dialog box. (A sample print dialog appears below.)
In both the Pages from and to fields, enter the page number on which the Wall Mounting Template appears.
Be sure you print the template at 100% scale and that Fit to page is not checked in the Print dialog box.
3Click OK to print the template.
4Measure the printed template with a ruler to ensure that it is the correct size.
5Use a center punch to mark the center of the holes on the wall.
6On the wall, locate the marks for the mounting holes you just made.
WARNING!
Before drilling holes, check the structure for potential damage to water, gas, or electric lines.
7Drill the holes to a depth of at least 3.8 cm (1½ inches).
8If necessary, seat an anchor in each hole. Use M5 x 38 mm
WE800G |
