Motorola WE800G manual Easy Software Setup, Manual Software Setup

Installation Section 2

Easy Software Setup

Run the Installation Wizard program from the supplied CD-ROM to quickly setup your network. Once your network is up and running, refer to Section 3:Configuration for advanced configuration.

Manual Software Setup

If you’d prefer to manually set up your network, use this section to configure it. This section describes the physical connection of the Wireless Ethernet Bridge to your network as well as the configuration needed by your PC.

To set up your wireless network:

!Physically connect and power on the Wireless Ethernet Bridge

!Configure your PCs

!Enter Wireless Security settings

Wired Connection to Wireless Ethernet Bridge

This section applies if you are connecting your PC with an Ethernet adapter to the Wireless Ethernet Bridge. Your PC must first have an Ethernet adapter installed.

You need the supplied Ethernet cable to connect the PC to the Wireless Ethernet

Bridge.

WE800G 2-9